barrel replacement

nukem556 · 12-19-2010, 07:59 PM

Norm is a very wise man, because he agrees with me! heh....Butch's is my favorite solvent too....you may also have some good luck with JB Bore Paste...it's a very, very mild abrasive and will clean and polish the bore better than anything....don't be alarmed by the "abrasive" label...it's used by competition shooters every few hundred rounds in their high-dollar match grade barrels.

tmmcnay@hotmail.com · 12-19-2010, 11:47 PM

Thank all for your ideas on brand name cleaners,etc. I know 2 long term pistol smiths and I will have them look at the bore to see if my assessment of "slightly pitted" is correct and go from there.

12-19-2010, 11:47 PM	#2
tmmcnay@hotmail.com New User Join Date: Dec 2010 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks to all who have replied. Thank all for your ideas on brand name cleaners,etc. I know 2 long term pistol smiths and I will have them look at the bore to see if my assessment of "slightly pitted" is correct and go from there.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-19-2010, 07:59 PM	#1
nukem556 User Join Date: Jul 2010 Location: Irmo, SC Posts: 625 Thanks: 35 Thanked 168 Times in 107 Posts	Norm is a very wise man, because he agrees with me! heh....Butch's is my favorite solvent too....you may also have some good luck with JB Bore Paste...it's a very, very mild abrasive and will clean and polish the bore better than anything....don't be alarmed by the "abrasive" label...it's used by competition shooters every few hundred rounds in their high-dollar match grade barrels.