1915 4inch artillery luger /??? PICS...

ducrnd · 12-08-2010, 10:57 PM

OK. I found a way to post pics. just not in the link here. if you click on my profile and look in my albums..I have 5 pictures.. any info on this one would be great..
email direct..
ducrnd@yahoo.com

MFC · 12-09-2010, 01:49 AM

Kevin,
The original 8" barrel was cut down to 4". I've read that it was done after WWI to comply with the Treaty of Versailles. I don't know if this is fact are not.

sheepherder · 12-09-2010, 06:50 AM

Wow...They don't get much stranger than that...

More a 'Mortar Luger' than an Artillery Luger...

Front sight doesn't look high enough to be any help in sighting...

Is the front sight dovetailed to the barrel??? Or just brazed right on???...Offhand, I would think a gunshop mod rather than anything done by German armorers...

alanint · 12-09-2010, 08:07 AM

I would send that gun to Luger Doc for a new barrel and use the artillery rear sight parts in part exchange. Then you would have a gun you actually shoot

Vlim · 12-09-2010, 09:42 AM

The Spandau arsenal did rebarrel / shorten a number of LP08 pistols, but this was done by removing the original LP08-barrel with rear sight and replacing them with a normal 4-inch barrel and a regular rear toggle piece with integrated rear sight.

This looks like a home job to me. I would have it fitted with a replacement long barrel. Artilleries are great to shoot, especially with the stock attached. Since you have the full rear sight blade, that will cut the costs of a replacement quite a bit.

ducrnd · 12-09-2010, 03:36 PM

Ok.... Front sight IS Dove tailed into the barrel,,,, and if they were cut down after WW I for treaty reason... then why have seen mid 20's long barrel one ??? Just asking because " " I KNOW'z NUTHINGZ , NUUUUUTHINGZ" "
( Hogan's hero's referance there...)

ducrnd · 12-09-2010, 03:37 PM

Oh .. another... then if these were a cut down.... why haven't I seen more of these...
I have seen alot of pre WWI and post WWI , but never a short barrel like this.?? just asking....

Vlim · 12-09-2010, 05:32 PM

The conversions were made in order to compy to IACC (interallied control commission) scrutiny and was only done 'for show' to a number of artilleries in official Reichswehr possession. Of course, the Germans didn't show the IACC everything, they kept large stashes of firearms hidden until the need arose. Many artilleries that were stashed away were later reissued to the navy.

Foreign sales were not a real problem, so DWM was free to export guns and barrels (and they did anyway, forbidden or not) to other countries.

This particular conversion shown is certainly not one of the official conversions. I'm quite sure it is a home job, performed in the US.

Ron Wood · 12-10-2010, 01:24 AM

These short barreled LP08s show up in the oddest places. Here is the cover of a paperback whodunit from 1989.

Vlim · 12-10-2010, 08:19 AM

Wow, and a rare lefthanded version as well

Nice book cover!

John Sabato · 12-10-2010, 09:38 AM

We have seen one similarly cut artillery model on the forum some years ago, but it did not have a front sight installed at all.

IIRC, the story was that the gun had been in the possession of the French resistance and had the barrel cut to make it concealable. Those guys didn't do much long distance shooting anyway... they tended to carry out their assassinations at muzzle to skin distances...

if it were mine, I would send the upper receiver to Lugerdoc, and he will assemble a reproduction Artillery barrel on it and use the original rear sight assembly. It will make a really fine Artillery shooter in it's original form.

Ron Wood · 12-10-2010, 10:10 AM

Quote:

Originally Posted by Vlim

Wow, and a rare lefthanded version as well

Sharp eye Gerben...I wondered if anyone would pick up on that!

Lugerdoc · 12-10-2010, 11:27 AM

I've seen a couple 4" "LPO8" before and alway thought that the conversion might be a result of a bulge in the area that was removed. I've also seen many 7&1/2" barrelled LPO8 where the barrel was cut off just aft of the front sight base, most likely due to a frozen up fine tune front sight, and a fixed C96 sight was installed. I do have a few of these barrels with exc bores available, but i'm sold out of both orig & new repro 8" LPO8 barrels. Finally, I did once owe a "left hand" pattern home made (or Brenner pass special) 16+" barrelled non-self loading luger in .30 Carbine caliber. The barrelled receiver was fixed and you had to pull back the toggle to load the next round. TH

Vlim · 12-10-2010, 11:36 AM

Herbert Werle in Germany still makes reproductions of luger barrels, including the LP08 version.

http://www.waffen-werle.de/inhalt/preise.htm

jcoe · 12-10-2010, 01:22 PM

Here is another LP08 with barrel shortened in a way that preserved the original front sight.
http://luger.gunboards.com/showthrea...highlight=lp08
John

Conny · 12-10-2010, 04:16 PM

Left-handed Luger. Ok, I guess I'm ignorant but what makes it left-handed?

Actually, I'd love to own a shortened (Baby) Artillery. I think it looks cute.

...........Never mind. I see he meant the pamphlet cover..........

Ron Wood · 12-10-2010, 04:24 PM

The Luger on the front cover has been printed as a reverse (mirror) image.

Curss · 12-10-2010, 07:09 PM

Quote:

Herbert Werle in Germany still makes reproductions of luger barrels, including the LP08 version.

I wish it was in english, I need a bloody artillery barrel!

sheepherder · 12-10-2010, 07:29 PM

Quote:

Originally Posted by jcoe

Here is another LP08 with barrel shortened in a way that preserved the original front sight.
http://luger.gunboards.com/showthrea...highlight=lp08
John

I get an error msg on that page when I try to view the images...I am logged in, but the images seem to be missing...

Did anyone save them??? Please post here if so...Thank You!

Oh...It's jcoe's thread...

jcoe - do you still have those pics??? Could you post them for us...please???

Vlim · 12-10-2010, 08:19 PM

Curss, Werle speaks English. Just pop him an email

12-08-2010, 10:57 PM	#1
ducrnd User Join Date: Dec 2010 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	1915 4inch artillery luger /??? PICS... OK. I found a way to post pics. just not in the link here. if you click on my profile and look in my albums..I have 5 pictures.. any info on this one would be great.. email direct.. ducrnd@yahoo.com

12-09-2010, 01:49 AM	#2
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Kevin, The original 8" barrel was cut down to 4". I've read that it was done after WWI to comply with the Treaty of Versailles. I don't know if this is fact are not. __________________ Mike C.

12-09-2010, 06:50 AM	#3
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	Wow...They don't get much stranger than that... More a 'Mortar Luger' than an Artillery Luger... Front sight doesn't look high enough to be any help in sighting... Is the front sight dovetailed to the barrel??? Or just brazed right on???...Offhand, I would think a gunshop mod rather than anything done by German armorers... __________________ I like my coffee the way I like my women... ...Cold and bitter...

12-09-2010, 08:07 AM	#4
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	I would send that gun to Luger Doc for a new barrel and use the artillery rear sight parts in part exchange. Then you would have a gun you actually shoot Last edited by alanint; 12-09-2010 at 10:29 AM.

12-10-2010, 01:24 AM	#9
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	These short barreled LP08s show up in the oddest places. Here is the cover of a paperback whodunit from 1989. Attached Thumbnails __________________ If it's made after 1918...it's a reproduction

12-09-2010, 09:42 AM	#5
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	The Spandau arsenal did rebarrel / shorten a number of LP08 pistols, but this was done by removing the original LP08-barrel with rear sight and replacing them with a normal 4-inch barrel and a regular rear toggle piece with integrated rear sight. This looks like a home job to me. I would have it fitted with a replacement long barrel. Artilleries are great to shoot, especially with the stock attached. Since you have the full rear sight blade, that will cut the costs of a replacement quite a bit.

12-09-2010, 03:36 PM	#6
ducrnd User Join Date: Dec 2010 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Ok.... Front sight IS Dove tailed into the barrel,,,, and if they were cut down after WW I for treaty reason... then why have seen mid 20's long barrel one ??? Just asking because " " I KNOW'z NUTHINGZ , NUUUUUTHINGZ" " ( Hogan's hero's referance there...)

12-09-2010, 03:37 PM	#7
ducrnd User Join Date: Dec 2010 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Oh .. another... then if these were a cut down.... why haven't I seen more of these... I have seen alot of pre WWI and post WWI , but never a short barrel like this.?? just asking....

12-09-2010, 05:32 PM	#8
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	The conversions were made in order to compy to IACC (interallied control commission) scrutiny and was only done 'for show' to a number of artilleries in official Reichswehr possession. Of course, the Germans didn't show the IACC everything, they kept large stashes of firearms hidden until the need arose. Many artilleries that were stashed away were later reissued to the navy. Foreign sales were not a real problem, so DWM was free to export guns and barrels (and they did anyway, forbidden or not) to other countries. This particular conversion shown is certainly not one of the official conversions. I'm quite sure it is a home job, performed in the US.

12-10-2010, 08:19 AM	#10
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Wow, and a rare lefthanded version as well Nice book cover!

12-10-2010, 09:38 AM	#11
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	We have seen one similarly cut artillery model on the forum some years ago, but it did not have a front sight installed at all. IIRC, the story was that the gun had been in the possession of the French resistance and had the barrel cut to make it concealable. Those guys didn't do much long distance shooting anyway... they tended to carry out their assassinations at muzzle to skin distances... if it were mine, I would send the upper receiver to Lugerdoc, and he will assemble a reproduction Artillery barrel on it and use the original rear sight assembly. It will make a really fine Artillery shooter in it's original form. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-10-2010, 11:27 AM	#13
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	I've seen a couple 4" "LPO8" before and alway thought that the conversion might be a result of a bulge in the area that was removed. I've also seen many 7&1/2" barrelled LPO8 where the barrel was cut off just aft of the front sight base, most likely due to a frozen up fine tune front sight, and a fixed C96 sight was installed. I do have a few of these barrels with exc bores available, but i'm sold out of both orig & new repro 8" LPO8 barrels. Finally, I did once owe a "left hand" pattern home made (or Brenner pass special) 16+" barrelled non-self loading luger in .30 Carbine caliber. The barrelled receiver was fixed and you had to pull back the toggle to load the next round. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

12-10-2010, 11:36 AM	#14
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Herbert Werle in Germany still makes reproductions of luger barrels, including the LP08 version. http://www.waffen-werle.de/inhalt/preise.htm

12-10-2010, 01:22 PM	#15
jcoe User Join Date: Jun 2002 Location: mt Posts: 38 Thanks: 13 Thanked 31 Times in 9 Posts	Here is another LP08 with barrel shortened in a way that preserved the original front sight. http://luger.gunboards.com/showthrea...highlight=lp08 John

12-10-2010, 04:16 PM	#16
Conny User Join Date: Dec 2006 Location: Culpeper, Va. Posts: 279 Thanks: 0 Thanked 26 Times in 13 Posts	Left-handed Luger. Ok, I guess I'm ignorant but what makes it left-handed? Actually, I'd love to own a shortened (Baby) Artillery. I think it looks cute. ...........Never mind. I see he meant the pamphlet cover.......... __________________ Rangers Lead the Way, Duane Leiker

12-10-2010, 04:24 PM	#17
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	The Luger on the front cover has been printed as a reverse (mirror) image. __________________ If it's made after 1918...it's a reproduction

12-10-2010, 08:19 PM	#20
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Curss, Werle speaks English. Just pop him an email

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode