new guy here with a question or 3

DavidJayUden · 07-27-2010, 11:03 AM

Simply clicking the grips together should tell you if they are plastic or wood, or a very small touch with a dremel on the back , but that is a bit distructive. Bottom line is that you have them in front of you so you should know. If they look like a duck...
Regarding the magazine, if you release the mag just a hair and lower the mag. about 1/32nd" does all work well? If so very careful polishing on the top/rear of the mag. body will give you clearence, however that's probably why we use MecGar's and put the good stuff away...
dju

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-27-2010, 11:03 AM	#8
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Simply clicking the grips together should tell you if they are plastic or wood, or a very small touch with a dremel on the back , but that is a bit distructive. Bottom line is that you have them in front of you so you should know. If they look like a duck... Regarding the magazine, if you release the mag just a hair and lower the mag. about 1/32nd" does all work well? If so very careful polishing on the top/rear of the mag. body will give you clearence, however that's probably why we use MecGar's and put the good stuff away... dju