New to forum - 1st Luger question

FNorm · 06-19-2010, 08:43 AM

Welcome to the Forum. sounds like a 1936 Mauser made. The 1936 should be on the top of the receiver, not the slide. The marks on the right of the frame are inspection and test proofs. Typically eagle/63, eagle/63/, then the test proof, another stylized eagle. This is repeated on the barrel. The full serial number is on the front of the frame, often with a letter suffix. This number should be repeated on the underside of the barrel.

Check on this forum under 'technical information' for all the markings. Left side of the main screen.

FN

sheepherder · 10-19-2010, 04:55 PM

Quote:

Originally Posted by FNorm

Check on this forum under 'technical information' for all the markings. Left side of the main screen.

That would be the left side of here --> http://www.lugerforum.com/

(I was here about a year before someone told me where to find the main page...)

06-19-2010, 08:43 AM	#1
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Welcome to the Forum. sounds like a 1936 Mauser made. The 1936 should be on the top of the receiver, not the slide. The marks on the right of the frame are inspection and test proofs. Typically eagle/63, eagle/63/, then the test proof, another stylized eagle. This is repeated on the barrel. The full serial number is on the front of the frame, often with a letter suffix. This number should be repeated on the underside of the barrel. Check on this forum under 'technical information' for all the markings. Left side of the main screen. FN Last edited by FNorm; 06-19-2010 at 08:57 AM. Reason: add

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode