Do you guys mind another one of these "help" threads?

FNorm · 05-28-2010, 11:19 PM

That's called the 'Hold Open' the toggle stays back on an empty magazine. Take the mag out, pull back on the toggle and it will close. BUT, do this slowly, holding it against the spring tension, about 3/8s of an inch before full closure, pull the trigger back and hold it. Thus the action will close, but not arm the firing pin.

FN

historicus · 05-28-2010, 11:24 PM

Thanks FNorm!

Worked like a charm.

You guys are one helpful, friendly bunch.

Many thanks to each.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-28-2010, 11:19 PM	#1
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	That's called the 'Hold Open' the toggle stays back on an empty magazine. Take the mag out, pull back on the toggle and it will close. BUT, do this slowly, holding it against the spring tension, about 3/8s of an inch before full closure, pull the trigger back and hold it. Thus the action will close, but not arm the firing pin. FN

05-28-2010, 11:24 PM	#2
historicus User Join Date: May 2010 Posts: 13 Thanks: 12 Thanked 0 Times in 0 Posts	Thanks FNorm! Worked like a charm. You guys are one helpful, friendly bunch. Many thanks to each.