Toggle will not stay open?

Lugerdoc · 04-01-2010, 11:30 AM

Levi, I do have the springs in stock @$15 + $3 S&H. This spring provides DOWNWARD pressure on the HO, so should not prevent it from applying, but if weak will prevent HO from unlocking when the mag is removed. I would check just how high this HO rises with his empty mag with the top of luger removed, and if it is free to spring up when pushed down. Most times it is the mag that is at fault. TH

Levi 42 · 04-01-2010, 10:17 PM

OK Guys, thanks for you help. I have tried several mags, even one new Meg-Gar with no success.

Would replacing this spring effect the originality of the gun? It is a quite nice all matching except mag.

Thanks again...........

04-01-2010, 11:30 AM	#1
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Levi, I do have the springs in stock @$15 + $3 S&H. This spring provides DOWNWARD pressure on the HO, so should not prevent it from applying, but if weak will prevent HO from unlocking when the mag is removed. I would check just how high this HO rises with his empty mag with the top of luger removed, and if it is free to spring up when pushed down. Most times it is the mag that is at fault. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-01-2010, 10:17 PM	#2
Levi 42 User Join Date: Jul 2009 Location: Western PA Posts: 49 Thanks: 4 Thanked 24 Times in 8 Posts	OK Guys, thanks for you help. I have tried several mags, even one new Meg-Gar with no success. Would replacing this spring effect the originality of the gun? It is a quite nice all matching except mag. Thanks again...........