![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
![]() |
#1 |
User
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
|
![]()
The gun has been chemically cleaned at some point, I say this because the pits are rust free. I see some rust forming in the grip area from finger prints and as long as the gun is bare it will be subject to easy rusting.
The gun is a family collectible and should remain in the family if at all possible. Many of the markings are thin from natural use and acid cleaning, IMO you would not devalue the gun by giving it a finish of some kind. I would not use any of the cold blue you find in the local stores, most will not last, Brownells has several alternatives that give a much longer lasting finish http://www.brownells.com I like some of the gray phosphate finishes that can be applied at home, they last almost forever and would keep the gun protected while maintaining a similar look. Thanks for sharing your gun with us Vern |
![]() |
![]() |
![]() |
#2 |
User
Join Date: Jan 2010
Location: South Carolina
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]()
Vern
Appreciate the info and comments. Found something on a German website that specifically mentioned a "German gray phosphate finish" used in WWII. Is that similar to what you are referring? Also could it be possible that is what is on gun now and finally wearing off? Just a thought. It would be exciting to restore to "original" finish. Thanks again for all your help. Ron |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|