Malfunctioning Toggle....Help!

[alvin]

Originally Posted by 135C/C

If you slowly bring the toggle forward, spring tension will not completely close the breech. To close it the last 3/16"- 1/4" or so, you have to lightly push down or tap on the toggle. It will only "spring" closeed the last 1/16". If you release the toggle from the fully rearward position, the centrifigual force will fully and strongly close the breech. With the breech fully closed, you can pull the toggle with VERY LITTLE tension fealt (if any) until the breach is open 3/16"- 1/4".

The behavior as described is exactly correct on Luger. I did not see any problem. Welcome to the forum!