new owner needs basic help//

FNorm · 11-27-2009, 08:05 PM

Lasn,

I'm about as basic as you can get! Pictures are needed to be able to tell you anything. There's instructions here on the board, but I can't look that up and type too. Basically write your message, then page down to find 'Advanced' Find upload pictures. As for pictures, look through the site albums. Note the lighting and what is needed from the piece. i.e. Toggle, right side proofs, chamber stampings, front of frame, under the barrel, etc.

Care for it as you would any fine gun. But don't get oil on the wood grips.

11-27-2009, 08:05 PM	#2
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Lasn, I'm about as basic as you can get! Pictures are needed to be able to tell you anything. There's instructions here on the board, but I can't look that up and type too. Basically write your message, then page down to find 'Advanced' Find upload pictures. As for pictures, look through the site albums. Note the lighting and what is needed from the piece. i.e. Toggle, right side proofs, chamber stampings, front of frame, under the barrel, etc. Care for it as you would any fine gun. But don't get oil on the wood grips. Last edited by FNorm; 11-27-2009 at 08:06 PM. Reason: spell

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode