Your Preferred C96 Loading Style

alvin · 09-18-2009, 05:45 PM

Mauser made ~1 million semi-auto C96, only first 20 thousands had this feature (hammer releasable while bolt is open!). So, 2%. It won't work on small ring, the trigger is disconnected from the sear when the bolt is more than 1m/m away from the breech. Thanks to the "rocker plunger".

But if it's an very early gun, CH, transitional LRH (those two were classified by ATF as pre-1899 antique, no FFL required for transferring), and Italian Navy delivered in 1899. That's about it.

More pratical way is cut a notch on bolt bulge. But that messes up the gun. Find a replacement bolt and rework it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-18-2009, 05:45 PM	#15
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Mauser made ~1 million semi-auto C96, only first 20 thousands had this feature (hammer releasable while bolt is open!). So, 2%. It won't work on small ring, the trigger is disconnected from the sear when the bolt is more than 1m/m away from the breech. Thanks to the "rocker plunger". But if it's an very early gun, CH, transitional LRH (those two were classified by ATF as pre-1899 antique, no FFL required for transferring), and Italian Navy delivered in 1899. That's about it. More pratical way is cut a notch on bolt bulge. But that messes up the gun. Find a replacement bolt and rework it.