P08 1911/1920!

reglisseduthil · 06-16-2009, 02:16 PM

Can you help me to identify this P08? it a little suffered and there are lacks but it carries all the parts with the same number.

Edward Tinker · 06-16-2009, 02:48 PM

A bit beat ole gal, but like you said all matching including mag.

Built in 1911 by the gov't arsenal, it later received the 1920 gov't reichswehr property stamping. At some point it went into police service, and was issued to the Schutzpolizei (dang, can't rmember, Wiesbaden I think), Don Maus' new book would have it in it.

Then in the mid 1930's it received a police sear and magazine safety; the mag safety was removed a few years later (or made inoperable). The matching magazine is the later aluminum type, it would have originally been issued with a wood based mag bottom.

ed

reglisseduthil · 06-16-2009, 04:31 PM

many thanks; It is pity that the bolt of dismantling is broken!

reglisseduthil · 06-16-2009, 04:54 PM

other question... I don't know this part? could you help me again?

John Sabato · 06-16-2009, 05:13 PM

This is the police safety that prevents the gun from being discharged by pressing on the sear bar when there is a live round in the chamber and the top of the gun has been removed from the grip frame. ONLY on police guns.

you can also contact our member named "Policeluger" and he can repair your takedown lever to look and work like new... but be prepared to wait... he is a might busy man.

reglisseduthil · 06-16-2009, 05:56 PM

many thanks!!!!

Ron Wood · 06-16-2009, 06:04 PM

I second John's recommendation. Howard (Policeluger) is a master at repairing takedown levers. It is almost like magic.

reglisseduthil · 06-17-2009, 04:45 AM

I thank you, I go tried to contact him. I am not going to leave this part as it

06-16-2009, 02:16 PM	#1
reglisseduthil User Join Date: Jun 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	P08 1911/1920! Can you help me to identify this P08? it a little suffered and there are lacks but it carries all the parts with the same number.

06-16-2009, 02:48 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,974 Thanks: 2,072 Thanked 4,608 Times in 2,123 Posts	A bit beat ole gal, but like you said all matching including mag. Built in 1911 by the gov't arsenal, it later received the 1920 gov't reichswehr property stamping. At some point it went into police service, and was issued to the Schutzpolizei (dang, can't rmember, Wiesbaden I think), Don Maus' new book would have it in it. Then in the mid 1930's it received a police sear and magazine safety; the mag safety was removed a few years later (or made inoperable). The matching magazine is the later aluminum type, it would have originally been issued with a wood based mag bottom. ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

06-16-2009, 05:13 PM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	This is the police safety that prevents the gun from being discharged by pressing on the sear bar when there is a live round in the chamber and the top of the gun has been removed from the grip frame. ONLY on police guns. you can also contact our member named "Policeluger" and he can repair your takedown lever to look and work like new... but be prepared to wait... he is a might busy man. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

06-16-2009, 06:04 PM	#7
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,051 Thanks: 1,119 Thanked 5,286 Times in 1,728 Posts	I second John's recommendation. Howard (Policeluger) is a master at repairing takedown levers. It is almost like magic. __________________ If it's made after 1918...it's a reproduction

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-16-2009, 04:31 PM	#3
reglisseduthil User Join Date: Jun 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	many thanks; It is pity that the bolt of dismantling is broken!

06-16-2009, 04:54 PM	#4
reglisseduthil User Join Date: Jun 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	other question... I don't know this part? could you help me again?

06-16-2009, 05:56 PM	#6
reglisseduthil User Join Date: Jun 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	many thanks!!!!

06-17-2009, 04:45 AM	#8
reglisseduthil User Join Date: Jun 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	I thank you, I go tried to contact him. I am not going to leave this part as it