my new mitchell luger

Mauser George · 04-10-2009, 10:26 PM

bderose:

Here is what I would suggest you do to see where the problem is! My guess is that the 115 gr load is to light as you mentioned.

Insert the magazine into the Luger and pull back the toggle back till it locks open! If it does your first assumption was correct, you need a 124 gr round to function the toggle assembly.

I have yet to find a Luger magazine that the spring was too weak to function a Luger correctly!

Regards,

George

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-10-2009, 10:26 PM	#4
Mauser George User Join Date: Sep 2008 Location: New York Posts: 88 Thanks: 0 Thanked 2 Times in 2 Posts	bderose: Here is what I would suggest you do to see where the problem is! My guess is that the 115 gr load is to light as you mentioned. Insert the magazine into the Luger and pull back the toggle back till it locks open! If it does your first assumption was correct, you need a 124 gr round to function the toggle assembly. I have yet to find a Luger magazine that the spring was too weak to function a Luger correctly! Regards, George