Broken ejector question

shadow · 03-04-2009, 10:10 PM

I was cleaning my 1938 S/42 luger on Sunday and found that the ejector was broken and the triangle part was completely gone.
I immediately called Lugerdoc to get a new one. (Lugerdoc, you should be getting my letter and check soon)

Later I started thinking that I wasnÃ¢??t having noticeable ejection problems. IÃ¢??m thinking that ether it broke off on the last shot, or that the other cartrages in the magazine were pushing the spent round out.

Any thoughts, if the latter could happen.

Thanks,

Chris

John Sabato · 03-05-2009, 09:57 AM

It is more likely that the tip of the ejector is still in the operable zone to effect ejection when you shoot. Don't depend on it, change it as soon as the replacement arrives.

shadow · 03-11-2009, 04:22 PM

Thanks,

The whole triangle section was completely gone along with the part that it was attached to. Maybe it broke on the last shot. I took the rest of it off until the new one arrives.

Chris

shadow · 03-14-2009, 01:05 PM

Lugerdoc

The ejector looked great, and all but one of the dimensions were identical to the old one. It popped right in after only a minute or so with a file to shrink the round part in the rear down to fit in the mating hole in the side of the recieve. The old one was filed there too.

Thanks,

Chris

03-04-2009, 10:10 PM	#1
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	Broken ejector question I was cleaning my 1938 S/42 luger on Sunday and found that the ejector was broken and the triangle part was completely gone. I immediately called Lugerdoc to get a new one. (Lugerdoc, you should be getting my letter and check soon) Later I started thinking that I wasnÃ¢??t having noticeable ejection problems. IÃ¢??m thinking that ether it broke off on the last shot, or that the other cartrages in the magazine were pushing the spent round out. Any thoughts, if the latter could happen. Thanks, Chris __________________ The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington

03-05-2009, 09:57 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	It is more likely that the tip of the ejector is still in the operable zone to effect ejection when you shoot. Don't depend on it, change it as soon as the replacement arrives. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

03-11-2009, 04:22 PM	#3
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	Thanks, The whole triangle section was completely gone along with the part that it was attached to. Maybe it broke on the last shot. I took the rest of it off until the new one arrives. Chris __________________ The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington

03-14-2009, 01:05 PM	#4
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	Lugerdoc The ejector looked great, and all but one of the dimensions were identical to the old one. It popped right in after only a minute or so with a file to shrink the round part in the rear down to fit in the mating hole in the side of the recieve. The old one was filed there too. Thanks, Chris __________________ The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode