Need advice on Trommel Mag and Loader

calibrator · 03-10-2009, 10:22 PM

Thank You Ron and Goerge for your prompt responses. I won't see these pieces again until Sunday and will post pictures after that during my inspection period. I wasn't aware that there were repro TM08's. I do recall that the mag did not look like a conventional 8rd unit with an add-on. So I assume that if it holds ~32rds it is most likely an original. My biggest concern is with the Loader. Do the repros have the B/N makers mark in the same manner as the originals? Any other input is most welcome!!! Joe

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-10-2009, 10:22 PM	#5
calibrator User Join Date: Feb 2009 Location: Cave Creek Posts: 340 Thanks: 67 Thanked 271 Times in 108 Posts	Thank You Ron and Goerge for your prompt responses. I won't see these pieces again until Sunday and will post pictures after that during my inspection period. I wasn't aware that there were repro TM08's. I do recall that the mag did not look like a conventional 8rd unit with an add-on. So I assume that if it holds ~32rds it is most likely an original. My biggest concern is with the Loader. Do the repros have the B/N makers mark in the same manner as the originals? Any other input is most welcome!!! Joe