Trying to learn about Lugers

Edward Tinker · 03-04-2009, 03:34 PM

Well, the rust is active and the longer you wait, the more it eats away.

0000 steel wool or 0000 brass wool and oil will not hurt the finish.

Before cleaning;
When taking the grips off, first take the screws out, then the mag, then gently pry from one side and at the same time, push gently from the inside. Be very careful, as up at the top, especially where the safety lever is...

Ed

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-04-2009, 03:34 PM	#14
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,974 Thanks: 2,072 Thanked 4,608 Times in 2,123 Posts	Well, the rust is active and the longer you wait, the more it eats away. 0000 steel wool or 0000 brass wool and oil will not hurt the finish. Before cleaning; When taking the grips off, first take the screws out, then the mag, then gently pry from one side and at the same time, push gently from the inside. Be very careful, as up at the top, especially where the safety lever is... Ed