LUGER has Function Issues??

Lugerdoc · 01-31-2009, 08:57 AM

Mike, Yours does not sound like an ammo problem. If you are getting multiple rounds fired with one pull of the trigger, I suspect that the striker is not properly engaging the sear and at least one of these parts will need to be replaced. If on the other hand, your striker is cocking properly, then I would suspect that the disconnector plunger in the trigger bar, is not pushing the trigger lever in the side plate out of the way to reset to fire the next round. TH

01-31-2009, 08:57 AM	#11
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Mike, Yours does not sound like an ammo problem. If you are getting multiple rounds fired with one pull of the trigger, I suspect that the striker is not properly engaging the sear and at least one of these parts will need to be replaced. If on the other hand, your striker is cocking properly, then I would suspect that the disconnector plunger in the trigger bar, is not pushing the trigger lever in the side plate out of the way to reset to fire the next round. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode