Fluted firing pins

lugerholsterrepair · 12-25-2008, 05:48 PM

Dwight, Dosen't the 9MM round headspace on the case mouth and the step in the chamber is necessary for this purpose if no other?

above. In the examples I have seen, the fractures do not extend through to the relieved breechblock face, suggesting that escaping breech pressure is not the culprit. As a WAG, I wonder if it might rather be a result of impact fracture of the breechblock against the barrel/receiver face?

It could be that this bolt damage was the result of the weapon fireing out of battery, split the unsupported cartridge and the high pressure escaped upwards taking a portion of the bolt face with it?

Jerry Burney

12-25-2008, 05:48 PM	#16
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Dwight, Dosen't the 9MM round headspace on the case mouth and the step in the chamber is necessary for this purpose if no other? above. In the examples I have seen, the fractures do not extend through to the relieved breechblock face, suggesting that escaping breech pressure is not the culprit. As a WAG, I wonder if it might rather be a result of impact fracture of the breechblock against the barrel/receiver face? It could be that this bolt damage was the result of the weapon fireing out of battery, split the unsupported cartridge and the high pressure escaped upwards taking a portion of the bolt face with it? Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode