Are these Bakelite?

Douglas711 · 11-26-2008, 09:33 AM

When would these have been produced? Value?

Tac great info Thank you

Douglas711 · 12-01-2008, 09:55 PM

Anyone?????????

Quote:

Originally Posted by Douglas711

When would these have been produced? Value?

Tac great info Thank you

12-01-2008, 11:06 PM

I agree with Mr. Sabato, most likely molds were made from a set of grips and a liquid resin was poured into the molds. The originals were probably injection molded. The ejector pins are the round circles on the inside upper portion of the grip.

11-26-2008, 09:33 AM	#1
Douglas711 User Join Date: Feb 2003 Location: CA Posts: 64 Thanks: 0 Thanked 2 Times in 2 Posts	When would these have been produced? Value? Tac great info Thank you Last edited by Douglas711; 11-26-2008 at 10:12 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-01-2008, 11:06 PM	#3
Brad Guest Posts: n/a	I agree with Mr. Sabato, most likely molds were made from a set of grips and a liquid resin was poured into the molds. The originals were probably injection molded. The ejector pins are the round circles on the inside upper portion of the grip.