LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > General Discussions

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 09-29-2008, 01:21 AM   #11
Tomathvl
User
 
Tomathvl's Avatar
 
Join Date: May 2004
Location: Milan, IN
Posts: 363
Thanks: 3
Thanked 48 Times in 19 Posts
Default

Michael,
You state, "Admittedly, at present the cylinder edge rotates free of the frame at all times, the action is completely within factory spec, and all chambers align with the bore at lockup. The yoke matches the frame in tight fit and correct number, and there are neither marks nor records of factory rework." It sounds like the gun is now in 100% mechanical condition which is what you wanted. You have cosmetic damage that you think resulted from damage to the yoke. Maybe the shaft that supports the cylinder was slightly bent and it was replaced with a straight one. Maybe the damage happened some other way unrelated to the cylinder yoke or shaft being damaged. If the gun was advertised as 100% mechanically and it's 100% mechanically I don't see the issue. Perhaps the damage happened years ago and the seller didn't know any more than the bluing was damaged.
Tomathvl is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:42 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com