Is this front sight kosher?

Lugerdoc · 07-22-2008, 11:11 AM

Jim et al, I agree with the comments above, but seriously doubt that any of the bead front sight were ever installed at the factory (except on the Luger carbines). These were probably available as an option from some of the US importer (Stoeger, Pacific Arms, etc) as they would also install new barrels in either 7.65 or 9mm in lengths from 4" to 22". I do have both used and new original Luger front sight blades in stock in the $15 to $25 range but some fitting may be required. Lugerdoc at hellerarms@webtv.net

07-22-2008, 11:11 AM	#9
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Jim et al, I agree with the comments above, but seriously doubt that any of the bead front sight were ever installed at the factory (except on the Luger carbines). These were probably available as an option from some of the US importer (Stoeger, Pacific Arms, etc) as they would also install new barrels in either 7.65 or 9mm in lengths from 4" to 22". I do have both used and new original Luger front sight blades in stock in the $15 to $25 range but some fitting may be required. Lugerdoc at hellerarms@webtv.net __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode