The "Don't Do-it" people win! <IMG SRC="/luger/graphics/biggrin.gif" BORDER=0 ALT=":D"> <img BORDER=

Marvin · 11-01-2001, 01:50 PM

Big Norm,

To clean magazines, I remove the wood bottom, on aluminum bottom ones, I remove them also (except the center pin type), then remove the spring, then use the cheap brake cleaning fluid from the auto shops like Auto Zone. I spray the heck out of the inside, then wipe the inside with the cleaner good. The spary action cleans and washes away the years of grime and dirt. I then wipe with a bore cleaning solvent, then wipe dry and oil with Clenzoil, Break Free or other high quality rust preventative. This has worked for me and the mags are in excellent condition. Just be careful during the disassembly and reassembly of the bottoms.

Marvin

11-01-2001, 01:50 PM	#1
Marvin User Join Date: Jun 2002 Location: Upstate S.C. Posts: 1,132 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Thor Ammo (LONG) Big Norm, To clean magazines, I remove the wood bottom, on aluminum bottom ones, I remove them also (except the center pin type), then remove the spring, then use the cheap brake cleaning fluid from the auto shops like Auto Zone. I spray the heck out of the inside, then wipe the inside with the cleaner good. The spary action cleans and washes away the years of grime and dirt. I then wipe with a bore cleaning solvent, then wipe dry and oil with Clenzoil, Break Free or other high quality rust preventative. This has worked for me and the mags are in excellent condition. Just be careful during the disassembly and reassembly of the bottoms. Marvin

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode