Norrell's Moly-Resin on a Shooter

Zamo · 12-30-2007, 01:33 PM

Doh! It looks like I clicked the wrong button on the last picture...
It should be:

It's a fairly easy process, and hard to screw up. As with any sort of refinishing, the key is initial preperation. Clean, clean and clean. I usually use aerosol break cleaner and then bake the parts to be prepped in the oven for 20 minutes at 300 to get any remaining oils out. Then spray the stuff on. You can use a cheap $15 Walmart hobby airbrush with excellent results.
There is a guy named Stickman who I learned of over on AR15.com who is the MASTER at this and has made a wonderful guide.
Here is a link to his fantastic "How To".

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-30-2007, 01:33 PM	#7
Zamo User Join Date: Oct 2007 Location: Washington State Posts: 142 Thanks: 4 Thanked 13 Times in 9 Posts	Doh! It looks like I clicked the wrong button on the last picture... It should be: It's a fairly easy process, and hard to screw up. As with any sort of refinishing, the key is initial preperation. Clean, clean and clean. I usually use aerosol break cleaner and then bake the parts to be prepped in the oven for 20 minutes at 300 to get any remaining oils out. Then spray the stuff on. You can use a cheap $15 Walmart hobby airbrush with excellent results. There is a guy named Stickman who I learned of over on AR15.com who is the MASTER at this and has made a wonderful guide. Here is a link to his fantastic "How To".