P08 Artillery Drum Magazine

Mauser720 · 08-09-2007, 01:15 PM

I have two questions:

1. Does anyone know of a reference source for the proof marks or acceptance codes that appear on the 32 round drum magazines?

2. Does anyone know of an economical source for the tool which is used to reload these magazines?

Thank you,

Ron

Edward Tinker · 08-09-2007, 05:52 PM

Ron, welcome to the forum.

1. Believe the answer is no

2. There have been some fairly good repro's for years, and many times they are sold as original

Mauser720 · 08-09-2007, 06:32 PM

Ed - Thank you for the information. Ron

wlyon · 08-09-2007, 10:47 PM

Ron
The only markings on the drum mag. that I know about are
The Manufacturers:
B/N Bing Nurnberg
AEG Allgemeine Eleklrizitats Gesell Schaft
VAF Vereinigte Automten Fabriken Cologne
The serial number should be on the top and bottom of the drum.
Another mark is a Crown/(gothic) S. Seems to be a difference of opinion in the literature on whether this is a military proof or a manufacturer. I have a Bing with no other proofs. The greatest numbers were produced by Bing. Bill

Mauser720 · 08-09-2007, 11:44 PM

Bill -

Mine does have the B/N on both sides of the drum, so that must mean it is made by Bing Nurnberg. It also have the serial number on both sides, 160234. On the side of the drum with the folding handle, it also has the numbers that indicate how many rounds are in it: 12, 17, 22, 27, and 32. On the side opposit the handle/lever, on one of the tabs closest to the base of the upright magazine, there is stamped a letter "R"

Thank you so much for this information, I am saving it with the device.

Ron

wlyon · 08-10-2007, 12:45 AM

Ron
I would guess that the R is an inspectors mark. Bing is the name of the manufacturer located in Nurnberg. Bill

Lugerdoc · 08-10-2007, 09:37 AM

Bing was a famous pre WW2 maker of windup metal toys. I current own B/N 2nd type drum #311116 matching. I also have a spare perfect B/N marked repro loader available @$450. hellerarms@webtv.net

Mauser720 · 08-10-2007, 10:41 AM

Lugardoc - Thank you for the information regarding the availability of the repro loading tool. I will retain this for reference because it might be a while before I can afford that much. I have ordered the tool for fine tuning the sights, and am interested in what kind of accuracy can be expected at the longer ranges using the shoulder stock, etc. By the way, were all the shoulder stocks serially numbered? Mine appears to be all original and very old, but it does not have any serial number or marks on the metal or wood that I can see. The wood is so scratched and marred that if it ever did have a mark, it might have been obliterated. Ron

pisto · 08-25-2007, 03:43 PM

"VAF Vereinigte Automten Fabriken Cologne"
this seems to be a very rare maker ----
does anyone of you have seen this maker on a magazine already?

George Anderson · 08-26-2007, 08:07 AM

It is believed that VAF, while indicated as a manufacturer, never produced TM08's.

View Poll Results: P08 Artillery Drum Magazine - Does anyone know of a reference source for codes?
rmarti1943@aol.com	0	0%
Artillery Drum Magazine	0	0%
Multiple Choice Poll. Voters: 0. You may not vote on this poll

08-09-2007, 01:15 PM	#1
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	P08 Artillery Drum Magazine I have two questions: 1. Does anyone know of a reference source for the proof marks or acceptance codes that appear on the 32 round drum magazines? 2. Does anyone know of an economical source for the tool which is used to reload these magazines? Thank you, Ron

08-09-2007, 05:52 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Ron, welcome to the forum. 1. Believe the answer is no 2. There have been some fairly good repro's for years, and many times they are sold as original __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-09-2007, 10:47 PM	#4
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,655 Thanks: 3,212 Thanked 2,619 Times in 971 Posts	Ron The only markings on the drum mag. that I know about are The Manufacturers: B/N Bing Nurnberg AEG Allgemeine Eleklrizitats Gesell Schaft VAF Vereinigte Automten Fabriken Cologne The serial number should be on the top and bottom of the drum. Another mark is a Crown/(gothic) S. Seems to be a difference of opinion in the literature on whether this is a military proof or a manufacturer. I have a Bing with no other proofs. The greatest numbers were produced by Bing. Bill __________________ Bill Lyon

08-09-2007, 11:44 PM	#5
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	Bill - Mine does have the B/N on both sides of the drum, so that must mean it is made by Bing Nurnberg. It also have the serial number on both sides, 160234. On the side of the drum with the folding handle, it also has the numbers that indicate how many rounds are in it: 12, 17, 22, 27, and 32. On the side opposit the handle/lever, on one of the tabs closest to the base of the upright magazine, there is stamped a letter "R" Thank you so much for this information, I am saving it with the device. Ron __________________ Mauser720 - Ron "Those who do not know history are doomed to repeat it."

08-09-2007, 06:32 PM	#3
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	Ed - Thank you for the information. Ron __________________ Mauser720 - Ron "Those who do not know history are doomed to repeat it."

08-10-2007, 12:45 AM	#6
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,655 Thanks: 3,212 Thanked 2,619 Times in 971 Posts	Ron I would guess that the R is an inspectors mark. Bing is the name of the manufacturer located in Nurnberg. Bill __________________ Bill Lyon

08-10-2007, 09:37 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Bing was a famous pre WW2 maker of windup metal toys. I current own B/N 2nd type drum #311116 matching. I also have a spare perfect B/N marked repro loader available @$450. hellerarms@webtv.net __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

08-10-2007, 10:41 AM	#8
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	Lugardoc - Thank you for the information regarding the availability of the repro loading tool. I will retain this for reference because it might be a while before I can afford that much. I have ordered the tool for fine tuning the sights, and am interested in what kind of accuracy can be expected at the longer ranges using the shoulder stock, etc. By the way, were all the shoulder stocks serially numbered? Mine appears to be all original and very old, but it does not have any serial number or marks on the metal or wood that I can see. The wood is so scratched and marred that if it ever did have a mark, it might have been obliterated. Ron __________________ Mauser720 - Ron "Those who do not know history are doomed to repeat it."

08-25-2007, 03:43 PM	#9
pisto User Join Date: Feb 2003 Location: Germany Posts: 228 Thanks: 1 Thanked 0 Times in 0 Posts	"VAF Vereinigte Automten Fabriken Cologne" this seems to be a very rare maker ---- does anyone of you have seen this maker on a magazine already?

08-26-2007, 08:07 AM	#10
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,531 Times in 788 Posts	It is believed that VAF, while indicated as a manufacturer, never produced TM08's.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode