Firing pin protrusion

06-04-2007, 08:12 PM

Thanks for the replies. I have attached a pic of the breach face and the fired cases as requested. The case on the left has a small pin hole in the primer the one on the right is ok. As I mentioned very few have the pin hole, maybe 5-6 out of a box of 50. My macro photograpy is not that great.

Here's the breach face. Firing pin protrudes .055".

The tip of the pin looks to have a slight "tit" on it when viewed on a 20X jewelers loupe

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-04-2007, 08:12 PM	#1
Brad Guest Posts: n/a	Thanks for the replies. I have attached a pic of the breach face and the fired cases as requested. The case on the left has a small pin hole in the primer the one on the right is ok. As I mentioned very few have the pin hole, maybe 5-6 out of a box of 50. My macro photograpy is not that great. Here's the breach face. Firing pin protrudes .055". The tip of the pin looks to have a slight "tit" on it when viewed on a 20X jewelers loupe