Cheap .30 loads

Mckenzie · 09-12-2006, 08:35 PM

So far no failures necking down. You do have to lube the cases. Just a dab of vasoline or other grease on your fingers and rubbed on the case. There is very little support for the bullet, don't no if this will work with cast bullets. Still a cheap alternate to buying .30 luger. Also I am shooting these in a p block commercial. Using an old DWM magazine. Seat the bullets as far out as possible.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-12-2006, 08:35 PM	#4
Mckenzie Patron LugerForum Patron Join Date: Jul 2005 Location: Minnesota Posts: 30 Thanks: 0 Thanked 7 Times in 5 Posts	So far no failures necking down. You do have to lube the cases. Just a dab of vasoline or other grease on your fingers and rubbed on the case. There is very little support for the bullet, don't no if this will work with cast bullets. Still a cheap alternate to buying .30 luger. Also I am shooting these in a p block commercial. Using an old DWM magazine. Seat the bullets as far out as possible.