LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > New Collectors Forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 09-05-2006, 01:37 PM   #3
John Sabato
Lifer
Lifetime Forum
Patron
 
John Sabato's Avatar
 
Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,156
Thanks: 3,003
Thanked 2,309 Times in 1,098 Posts
Default

the holdopen is actually operated by contact with the spring loaded mag button. Make sure there is adequate clearance under the right grip for this to take place. If you remove the top assembly, you should be able to see the mag button press against and raise the holdopen device... try doing this without the right grip attached to see if there is any difference in reliability... aftermarket magazines are not necessarily manufactured to operate the holdopen reliably... the best magazines are the extruded FXO type or the east german clones of the original mags...

Mec-gar mags are the best aftermarket mags...

If the pins in your existing magazines do not stay put well enough to allow unfettered insertion, I would only use them on the range if there are not any known good ones... the finnish mag has probably seen it's better days...
__________________
regards, -John S

"...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..."
John Sabato is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com