Opinions on this holster

Joe Brailsford · 07-25-2006, 08:00 AM

Hi Guys,

New comer here with my first post.
I am considering the purchase of this holster could you guys in the know let me know about this holster.

Thanks
Joe

Joe Brailsford · 07-25-2006, 08:02 AM

For some reason I can't get mor than 1 picture to post (most likely because I don't know what I'm doing). Here is the back.

Vlim · 07-25-2006, 08:05 AM

Hi,

Looks good to me. A full shot of the back, showing the complete stitching pattern would help.

Joe Brailsford · 07-25-2006, 08:07 AM

Thanks for the reply.
Here is the full back view.

Joe

Vlim · 07-25-2006, 08:15 AM

Hi,

Looks perfect to me. Everything I'd expect to see.
Of course, Jerry is our real expert. Perhaps he'll comment on it?

the gunman · 07-25-2006, 09:26 AM

Sure is nothing wrong with that holster.

lugerholsterrepair · 07-25-2006, 11:17 AM

Gerben and Ritchie have nailed this one. Looks nice. I would request a photo of the front with the top open. I don't think it's the case here but it might disclose any problems that might be inside. Somtimes holsters are cut away for quick draw and this is covered by the top or the tool pouch has some problems. Also you cannot see the lifting strap in the photo's provided. All of these would be interesting to know about.
Again, this holster does not appear to have this rare problem but it has surfaced for me recently, check to see if a pistol will fit into it. Over time some holsters shrink just enough to give this problem.
Jerry Burney

Joe Brailsford · 07-25-2006, 11:50 AM

Thanks for the comments.

I won't be able to try the holster for fit, but here is a picture of the top open.

I still can't figure out how to do multiple pics so I will send another pic showing the mag pouch with the top open.

As far as the lifting strap they have replied "Inside of holster body has a quick release strap stitched to top flap and front body".

lugerholsterrepair do you repair all types of holsters I have ordered a Nambu Type 14 that needs some repairs (I haven't seen it yet hopefully this week) it was cheap!

Thanks
Joe

Joe Brailsford · 07-25-2006, 11:51 AM

Here is the mag pouch. Thats all folks!!

Thanks again

Joe

lugerholsterrepair · 07-25-2006, 03:42 PM

Joe, Looks like a really nice Luger holster. I am somewhat confused by their description of the lifting strap.
" the lifting strap they have replied "Inside of holster body has a quick release strap stitched to top flap and front body". This is a description for a P-38 lifting strap!
The Luger holster should be connected at the lower stitching line of the inside panel at the back, protruding to the front right of the body through a slot ending in a knot. Curious. Probably nothing amiss.
Yes, I repair any pre 1945 holster. I specialize in all German but have restored many a Japanese.
Jerry Burney

Joe Brailsford · 07-25-2006, 04:16 PM

Jerry,
Thanks for the info and quick response.
I pulled the trigger and bought the holster.
I think it was a good deal at $200.00 and the dealer has fantastic feedback on GunBroker.com.
I will let you know about the condition of the Nambu holster and if it needs your expertise when I receive it.

Thanks, G. van Vlimmeren and the gunman for your advise and help.

Great Forum here!

Joe

lugerholsterrepair · 07-25-2006, 04:58 PM

Joe, Think you got a nice one at a more than reasonable price. Good Luck with it! Jerry Burney

Edward Tinker · 07-25-2006, 05:24 PM

Joe, welcome to the forum. Where you are adding one picture, in this section, it is all you can do. However, on the upper right is an upload photo's button, there you can upload a bunch, copy and then paste EACH url it gives you.

What I do is name all the pictures the same, except for, pic1, then pic2, then pic3, then I just copy and paste one url, put [ img] [/img ] (no spaces) on each side of the url and then upload the three pictures, simply changing the name of each url (or you have three show up the same) in the dialog box.

Ed

Joe Brailsford · 07-25-2006, 05:30 PM

Edward Tinker,

I guess thats why you are the "Super Moderator"

Thanks for the good instructions.

Joe

07-25-2006, 08:00 AM	#1
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinions on this holster Hi Guys, New comer here with my first post. I am considering the purchase of this holster could you guys in the know let me know about this holster. Thanks Joe Attached Thumbnails

07-25-2006, 08:02 AM	#2
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinion For some reason I can't get mor than 1 picture to post (most likely because I don't know what I'm doing). Here is the back. Attached Thumbnails

07-25-2006, 08:07 AM	#4
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinions Thanks for the reply. Here is the full back view. Joe Attached Thumbnails

07-25-2006, 11:17 AM	#7
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Gerben and Ritchie have nailed this one. Looks nice. I would request a photo of the front with the top open. I don't think it's the case here but it might disclose any problems that might be inside. Somtimes holsters are cut away for quick draw and this is covered by the top or the tool pouch has some problems. Also you cannot see the lifting strap in the photo's provided. All of these would be interesting to know about. Again, this holster does not appear to have this rare problem but it has surfaced for me recently, check to see if a pistol will fit into it. Over time some holsters shrink just enough to give this problem. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-25-2006, 11:50 AM	#8
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinions Thanks for the comments. I won't be able to try the holster for fit, but here is a picture of the top open. I still can't figure out how to do multiple pics so I will send another pic showing the mag pouch with the top open. As far as the lifting strap they have replied "Inside of holster body has a quick release strap stitched to top flap and front body". lugerholsterrepair do you repair all types of holsters I have ordered a Nambu Type 14 that needs some repairs (I haven't seen it yet hopefully this week) it was cheap! Thanks Joe Attached Thumbnails

07-25-2006, 08:05 AM	#3
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Hi, Looks good to me. A full shot of the back, showing the complete stitching pattern would help.

07-25-2006, 08:15 AM	#5
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Hi, Looks perfect to me. Everything I'd expect to see. Of course, Jerry is our real expert. Perhaps he'll comment on it?

07-25-2006, 09:26 AM	#6
the gunman User Join Date: Mar 2003 Location: Leland NC 28451 Posts: 1,017 Thanks: 1 Thanked 13 Times in 12 Posts	Sure is nothing wrong with that holster.

07-25-2006, 11:51 AM	#9
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinions Here is the mag pouch. Thats all folks!! Thanks again Joe Attached Thumbnails

07-25-2006, 03:42 PM	#10
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Joe, Looks like a really nice Luger holster. I am somewhat confused by their description of the lifting strap. " the lifting strap they have replied "Inside of holster body has a quick release strap stitched to top flap and front body". This is a description for a P-38 lifting strap! The Luger holster should be connected at the lower stitching line of the inside panel at the back, protruding to the front right of the body through a slot ending in a knot. Curious. Probably nothing amiss. Yes, I repair any pre 1945 holster. I specialize in all German but have restored many a Japanese. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-25-2006, 04:16 PM	#11
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Opinions Jerry, Thanks for the info and quick response. I pulled the trigger and bought the holster. I think it was a good deal at $200.00 and the dealer has fantastic feedback on GunBroker.com. I will let you know about the condition of the Nambu holster and if it needs your expertise when I receive it. Thanks, G. van Vlimmeren and the gunman for your advise and help. Great Forum here! Joe

07-25-2006, 04:58 PM	#12
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Joe, Think you got a nice one at a more than reasonable price. Good Luck with it! Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-25-2006, 05:24 PM	#13
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Joe, welcome to the forum. Where you are adding one picture, in this section, it is all you can do. However, on the upper right is an upload photo's button, there you can upload a bunch, copy and then paste EACH url it gives you. What I do is name all the pictures the same, except for, pic1, then pic2, then pic3, then I just copy and paste one url, put [ img] [/img ] (no spaces) on each side of the url and then upload the three pictures, simply changing the name of each url (or you have three show up the same) in the dialog box. Ed

07-25-2006, 05:30 PM	#14
Joe Brailsford User Join Date: Jul 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Edward Tinker, I guess thats why you are the "Super Moderator" Thanks for the good instructions. Joe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode