1938 S/42 Problem at the Range Today

Mike78 · 06-29-2006, 02:25 AM

Problem Solved!

A gunsmith friend solved the problem. It turned out that the top portion of "L" shaped lever connected to the trigger plate needed slight grinding to properly mesh with the trigger. The gun works perfectly now. In fact at the range, I did some of my best shooting at 25 yards. Thank you all for your input since this helped in the process of eliminating some of the possible causes of the problem.

Best Regards,

Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-29-2006, 02:25 AM	#1
Mike78 User Join Date: Jun 2006 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Problem Solved! A gunsmith friend solved the problem. It turned out that the top portion of "L" shaped lever connected to the trigger plate needed slight grinding to properly mesh with the trigger. The gun works perfectly now. In fact at the range, I did some of my best shooting at 25 yards. Thank you all for your input since this helped in the process of eliminating some of the possible causes of the problem. Best Regards, Mike