1937 Hk

[John D.]

Hey Ed..!!!

There is a .22 league on Tuesday nights - which - if I can ever get out of work on time on - I'll actually make!! I have a lot of .22s - so you and I ought to make it to a few...

Sure beats BINGO You have to wear those funny hats when you play BINGO? If so - I'm gonna pretend I don't know you...

Also - Bill..!!!

I tried to send you a reply a while ago - but I'm getting this reply:
Error
Action: delayed
Remote-MTA: mx.montana.com
Diagnostic-Code: SMTP; Cannot connect to remote host

Anyway - not a problem.. Here is my reply to your terrific pics, questions and HK you sent me in e-mail earlier today....

John Dunkle wrote:
> Hi Bill.!!
>
> I just spent the past 30 minutes going though the pictures - and here is
> my opinion.. This HK looks absolutely correct! The "7" is correct in
> both ligature and placement (which, having seen some boosted HKs - are
> quite apparent). As well - while in this serial range - the "7" is
> uncommon, your's is not the first HK I've seen in that range. I did a
> long piece on the Forum some time ago about HK manufacturing processes
> and dates - so you may want to refer to that thread?
>
> A couple of comments from the pictures....
>
> The grips are authentic - but there is a wear spot on left side. Not a
> problem...
>
> The LWaA 2 and proofs are exactly correct - both in definition and
> placement;
>
> Toggle stamp and markings are correct - as are the machining marks;
>
> the take-down has a small blem - but, it is correct in BOTH machining
> marks and cross-cut; based on the pictures - it would appear correct;
>
> Chamber date is absolutely correct - in both the digit stamps and
> baseline offset of the numerals;
>
> The lack of a witness mark is typically correct for a "1937", based on
> my database;
>
> Frame machining marks are absolutely correct - as is the
> placement/orientation of "Gesichert" in relation to the safety lever;
>
> The safety is correctly marked with small digits;
>
> Correct fire-blued small parts;
>
> Front well machining marks are correct as well - given the 1937 chamber
> date;
>
> Toggle ears are original production, as are the toggle links - from what
> I can see....
>
> Bill - while I would usually verify an HK only in person - from what I
> can see - this on is"right on". While I'd want to see the thumbprint
> and some finer detail - my guess is this HK would pass muster....
>
> My best to you - and thanks for sharing!!!
>
> John
>