Navy Parts on e-Bay...

Thor · 06-28-2004, 02:36 PM

There is but I think most of the sight height is taken up in a TALLER front sight block of an original Navy barrel. You MUST match the type of rear sight to the type of front sight to make the combination shoot to point of aim. For instance, I fired GTs parts Navy, it had the proper NAVY rear sight but it had a normal 6" barrel set up for a normal P08 rear sight. Well, it was shooting OVER the 300 meter target with the rear sight set at 100 meters. If fact, it was shooting about 11 inches high at 25 yds. I am told you can take a mauser rifle front sight that will fit into the dove tail of a Luger barrel and file it down to match the elevation correction.
The Navy barrel has a taller front sight block than a regular P08 Barrel.

06-28-2004, 02:36 PM	#7
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 971 Times in 277 Posts	There is but I think most of the sight height is taken up in a TALLER front sight block of an original Navy barrel. You MUST match the type of rear sight to the type of front sight to make the combination shoot to point of aim. For instance, I fired GTs parts Navy, it had the proper NAVY rear sight but it had a normal 6" barrel set up for a normal P08 rear sight. Well, it was shooting OVER the 300 meter target with the rear sight set at 100 meters. If fact, it was shooting about 11 inches high at 25 yds. I am told you can take a mauser rifle front sight that will fit into the dove tail of a Luger barrel and file it down to match the elevation correction. The Navy barrel has a taller front sight block than a regular P08 Barrel. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."