Erfurt-problems.....

Lugerdoc · 03-18-2003, 09:19 AM

PR, Your problem could be as simple as needing a new sear or firing pin, if it's not cocking. More likely, the disconnector (plunger in your trigger bar) is not getting under the trigger lever in your side plate, when you lower the toggle gentlely,so don't do that. I'd first check the spring pressure on you disconnector and if that seems sufficient, I'd next increase the bevel angle on your triggeer lever. Tom H.

03-18-2003, 09:19 AM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	PR, Your problem could be as simple as needing a new sear or firing pin, if it's not cocking. More likely, the disconnector (plunger in your trigger bar) is not getting under the trigger lever in your side plate, when you lower the toggle gentlely,so don't do that. I'd first check the spring pressure on you disconnector and if that seems sufficient, I'd next increase the bevel angle on your triggeer lever. Tom H. __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net