Luger Target Trigger Modification

[Blastattack]

Originally Posted by Michael Zeleny

Making a Luger trigger mimic that of an M1911 is a fool's errand. In effect, this method eliminates the first stage of the trigger action that was designed and built in a two stage pattern. It is an unsafe procedure that cannot be recommended under any circumstances.

I challenge that statement. What evidence do you have to support any of that?

I would hardly qualify the Luger as having a "two stage" trigger. A proper two stage trigger divides the total pull between the two stages, requiring a greater and longer pull in the first stage, and requiring a shorter but much lighter (not to mention crisp) pull in the second. The Luger's pull consists of taking the slack out f the mechanism, which takes a couple ounces, and then the full 7-8lbs in the last bit of movement. I also fail to see how such modifications are unsafe when done properly. If the instructions are followed to a T and the user does not over adjust the trigger to break on a hair, the pistol should work perfectly fine and be 100% safe. I'm sure Herbert Werle does a very similar procedure to this, and he seems to enjoy a very good reputation, both here and abroad.