Cocking problem?

[Lugerdoc]

As has been noted, this is a common problem, particularly on lugers with replaced or mismatched parts. I receive at least 2 lugers a month requiring "trigger jobs". I consider Hugh's fix as an alternative, non-factory type repair, but it usually works in the cases where the FP will release on initial cocking (where the overlap of the FP & sear are not too great and the trigger is engaging the trigger lever OK). THe factory fix would be to install a trigger lever that has the correct angle to both push in the sear far enough to release the FP (striker), AND come back far enough, when the trigger is release, to allow the disconnector (plunger in the trigger bar) to push past it. As you can see, there are several parts (tigger, sear, FP, trigger bar & disconnector) that must be in balance to operate correctly. TH