byf 42 luger info

wlyon · 02-12-2009, 11:04 PM

The grips are held in place by the top edges and the two grip screws. Remove the screws, remove the mag, place your finger inside and carefully push outward near the bottom of the grip. They should come off very easily. Be especially cautious on the left grip it is thin around the safety and prone to breakage. Yes the grips should be numbered. It might be difficult to see the numbers unless the grips are removed. They should be removed since the frame underneath could be rusty. Bill

02-12-2009, 11:04 PM	#21
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,652 Thanks: 3,210 Thanked 2,613 Times in 969 Posts	The grips are held in place by the top edges and the two grip screws. Remove the screws, remove the mag, place your finger inside and carefully push outward near the bottom of the grip. They should come off very easily. Be especially cautious on the left grip it is thin around the safety and prone to breakage. Yes the grips should be numbered. It might be difficult to see the numbers unless the grips are removed. They should be removed since the frame underneath could be rusty. Bill __________________ Bill Lyon