Luger Target Trigger Modification

Hugh · 02-14-2008, 08:56 PM

John,

I can't find those pictures in my files. However, I do have the article on my computer and will be happy to email it to any one requesting it. My email is hhclark@wildblue.net

Since then, I have determined that if you don't want to drill holes in your trigger, you can make minor improvements in the length of pull and sear engagement by SLIGHTLY bending the front tang of the trigger outward and/or VERY SLIGHTLY bending the trigger lip that engages the trigger lever downward. This will shorten the "free travel". Use caution however, as too much bending will cause the sear to fail to engage the firing pin. Do not attempt to bend the trigger lever, as you will just end up with a broken one. THEY DON'T BEND!

02-14-2008, 08:56 PM	#29
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	John, I can't find those pictures in my files. However, I do have the article on my computer and will be happy to email it to any one requesting it. My email is hhclark@wildblue.net Since then, I have determined that if you don't want to drill holes in your trigger, you can make minor improvements in the length of pull and sear engagement by SLIGHTLY bending the front tang of the trigger outward and/or VERY SLIGHTLY bending the trigger lip that engages the trigger lever downward. This will shorten the "free travel". Use caution however, as too much bending will cause the sear to fail to engage the firing pin. Do not attempt to bend the trigger lever, as you will just end up with a broken one. THEY DON'T BEND! __________________ *TRUMP FOR PREZ IN '20!*