Tough Grip Screw & Selling Your Luger For Parts

Mauser720 · 10-28-2007, 07:58 AM

Suggestion: Put Gunk brand "Liquid Wrench" on the screw and the screw thread area from inside the frame with the magazine removed. Tap it once or twice carefully with a plastic mallot and let it set for a while. Then remove the screw carefully using a hollow ground screw driver bit that fits the screw. Then clean the threads in the grip frame, and the screw. If the screw itself is damaged, replace it with a new screw. If you will put a tiny bit of gun oil on the screw before you put it back in, this may save your grief in the future.

Mauser720 - Ron

10-28-2007, 07:58 AM	#3
Mauser720 User Join Date: Aug 2007 Location: Kansas Posts: 535 Thanks: 18 Thanked 49 Times in 33 Posts	Suggestion: Put Gunk brand "Liquid Wrench" on the screw and the screw thread area from inside the frame with the magazine removed. Tap it once or twice carefully with a plastic mallot and let it set for a while. Then remove the screw carefully using a hollow ground screw driver bit that fits the screw. Then clean the threads in the grip frame, and the screw. If the screw itself is damaged, replace it with a new screw. If you will put a tiny bit of gun oil on the screw before you put it back in, this may save your grief in the future. Mauser720 - Ron __________________ Mauser720 - Ron "Those who do not know history are doomed to repeat it."