Luger gunsmithing

rimfire · 08-05-2007, 11:39 AM

Hi, all. I have a swiss mod.29 black grip #6799x which has a problem ejecting. It will stove-pipe on every shot.

This is an odd luger in that the breech block would get suck at mid-stroke when moving the block by hand.

Its almost as if the frame had been "pinched" together at one time. I did some careful stoning of the frame and made the block move much more smoothly but it still jams on every shot.

Before I screw it up, I would appreciate any recommendations of good gunsmiths who know their swiss lugers and can help me out with this gun.

Thanks, guys-

Jim

08-05-2007, 11:39 AM	#1
rimfire User Join Date: Jun 2005 Location: virginia beach, va Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts	Luger gunsmithing Hi, all. I have a swiss mod.29 black grip #6799x which has a problem ejecting. It will stove-pipe on every shot. This is an odd luger in that the breech block would get suck at mid-stroke when moving the block by hand. Its almost as if the frame had been "pinched" together at one time. I did some careful stoning of the frame and made the block move much more smoothly but it still jams on every shot. Before I screw it up, I would appreciate any recommendations of good gunsmiths who know their swiss lugers and can help me out with this gun. Thanks, guys- Jim