Luger stovepiping issues.

4 Scale · 09-18-2019, 01:09 AM

Don's reply has excellent info and gives a lot of things to look at. I would add on the double tap, sometimes people file down the sear protrusion on the firing pin or make other adjustments to the trigger/transfer lever/sideplate/sear bar spring/sear bar in an attempt to perform a 'trigger job" and decrease trigger pull. I suggest carefully inspect all those components, it is most helpful to have a separate properly operating pistol as a reference.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-18-2019, 01:09 AM	#9
4 Scale User Join Date: Nov 2014 Posts: 544 Thanks: 194 Thanked 490 Times in 251 Posts	Don's reply has excellent info and gives a lot of things to look at. I would add on the double tap, sometimes people file down the sear protrusion on the firing pin or make other adjustments to the trigger/transfer lever/sideplate/sear bar spring/sear bar in an attempt to perform a 'trigger job" and decrease trigger pull. I suggest carefully inspect all those components, it is most helpful to have a separate properly operating pistol as a reference.