Long Barrel .22 Conversion

sheepherder · 09-12-2014, 04:15 PM

Long Barrel .22 Luger project.

This is a commercial Luger receiver [barrel extension] mated to what appears to be a cut-down, threaded, and chambered .22LR rifle barrel. There is a dovetail under the threads (visible in pic #6) and the chamber area was left long, so that a Luger or Erma toggle assembly would not seat fully. There is no extractor cut and no feed ramp in the barrel. There is a blade front sight in a slot cut in the barrel, possibly original [the slot].

The owner also has a complete Erma SE 08/2 conversion 'kit'. Looks like it has never been fired.

I'll be doing the Erma .22 conversion kit adapted to the 7 1/2" custom .22 barreled Luger...

Original Erma parts will not be modified.

09-12-2014, 04:15 PM	#1
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,202 Thanks: 1,417 Thanked 4,462 Times in 2,336 Posts	Long Barrel .22 Conversion Long Barrel .22 Luger project. This is a commercial Luger receiver [barrel extension] mated to what appears to be a cut-down, threaded, and chambered .22LR rifle barrel. There is a dovetail under the threads (visible in pic #6) and the chamber area was left long, so that a Luger or Erma toggle assembly would not seat fully. There is no extractor cut and no feed ramp in the barrel. There is a blade front sight in a slot cut in the barrel, possibly original [the slot]. The owner also has a complete Erma SE 08/2 conversion 'kit'. Looks like it has never been fired. I'll be doing the Erma .22 conversion kit adapted to the 7 1/2" custom .22 barreled Luger... Original Erma parts will not be modified. Attached Thumbnails __________________ I like my coffee the way I like my women... ...Cold and bitter... Last edited by sheepherder; 09-24-2014 at 12:23 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode