PPK ammo

A.Mifsin · 09-27-2009, 01:24 AM

Hi All,
I have a PPK and tried to hand load some ammo for it. The manual stated that OAL is 24.99mm, but that size, the bullet will not chamber, because it is too long. I made the OAL 23.75mm and it works fine. Now I am worried because by reducing the OAL by 1.24mm I could be compressing the powder, which it might produce too much pressure.
Checking on a factory load bullet the OAL was nearly close to 24.99mm.

I am using a Lee bullet mould 90gr.
Any help is much appreciated.
Alf.

09-27-2009, 01:24 AM	#1
A.Mifsin User Join Date: Dec 2002 Location: Malta Posts: 570 Thanks: 74 Thanked 13 Times in 13 Posts	PPK ammo Hi All, I have a PPK and tried to hand load some ammo for it. The manual stated that OAL is 24.99mm, but that size, the bullet will not chamber, because it is too long. I made the OAL 23.75mm and it works fine. Now I am worried because by reducing the OAL by 1.24mm I could be compressing the powder, which it might produce too much pressure. Checking on a factory load bullet the OAL was nearly close to 24.99mm. I am using a Lee bullet mould 90gr. Any help is much appreciated. Alf. __________________ I prefer a Luger

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode