1917 DWM 9mm

Drake · 04-14-2008, 12:38 AM

I detail stripped the pistol and cleaned years' worth of gunk out of it. Upon further inspection it seems the trigger spring or trigger bar may be the culprit? If I dry fire it and cycle the toggle by hand it recocks properly. However, if I pull the trigger and hold it while cycling the toggles, it doesn't return fully forward until I release the trigger and the trigger remains to the rear until I push it forward a bit like I had to do at the range this afternoon.

Still looking for any advice on this issue, is there another part I should be looking at?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-14-2008, 12:38 AM	#2
Drake User Join Date: Apr 2008 Posts: 5 Thanks: 0 Thanked 7 Times in 2 Posts	I detail stripped the pistol and cleaned years' worth of gunk out of it. Upon further inspection it seems the trigger spring or trigger bar may be the culprit? If I dry fire it and cycle the toggle by hand it recocks properly. However, if I pull the trigger and hold it while cycling the toggles, it doesn't return fully forward until I release the trigger and the trigger remains to the rear until I push it forward a bit like I had to do at the range this afternoon. Still looking for any advice on this issue, is there another part I should be looking at?