Could be my first, assist needed

rlelvis · 02-17-2008, 08:24 PM

Could the markings have been obliterated durring rebuild/refinish or am I missing something?
The side of the extracter is marked GELADEN and there is what appears to be a U or half a 0 under the extractor but that is it.

Grips are wood, no question about it. They are slightly larger then the frame, front and rear overhang of about 1/16 inch +.

If I am not mistaken the RC on the bbl indicated an Erfurt/DWM rebuild or modification.

Also where might I look for info on the Bulgarian frame, history use of Lugers produced, etc?

Thanks Bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-17-2008, 08:24 PM	#6
rlelvis User Join Date: Feb 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Could the markings have been obliterated durring rebuild/refinish or am I missing something? The side of the extracter is marked GELADEN and there is what appears to be a U or half a 0 under the extractor but that is it. Grips are wood, no question about it. They are slightly larger then the frame, front and rear overhang of about 1/16 inch +. If I am not mistaken the RC on the bbl indicated an Erfurt/DWM rebuild or modification. Also where might I look for info on the Bulgarian frame, history use of Lugers produced, etc? Thanks Bob