Mitchell Luger (second try for picture)

boltgun · 01-27-2004, 03:53 PM

John Sabato · 01-27-2004, 04:54 PM

You were successful in the upload BOLTGUN, but I had to edit the URL to make it visible because you left out one character.

the best way to be successful in inserting a photo or graphic in your posts is to select and "copy" the URL that you are given by the upload page, and then "paste" the URL in between the [img] photoURLhere [/img] tags.

The easiest way to insert the URL is to use the "postreply" button and use the IMAGE button. This pops up a dialog box where you replace the "http://" that is defaulted there with the complete URL for the photo...

Go ahead and try again as many times as you like... Try a few more photos of your Mitchell.

Let me know when you are done experimenting with photo uploads and posts and I will just delete any error posts...

enjoy.

boltgun · 01-27-2004, 06:46 PM

John,

Thanks for all of your help and the additional explanation regarding the "upload" feature. I have taken other pictures however, they exceed 200kb and the upload link indicates that this is the limit. Anyway, the picture is of the recently acquired Mitchell, new and unfired without the box for $350.
boltgun

Herb · 01-27-2004, 07:44 PM

boltgun, heck of a deal, buy them all day at that price. On the size of your pics set your camera at its lowest quality setting, usually about 65-70 kb. For the purpose of posting to the forum the photos are great and fit well. The higher settings are only for making high quality prints on your printer or for sending to a processor, the lowest works fine and you will get a whole lot more of them out of your flash card.

Steve Richards · 01-27-2004, 08:39 PM

For that price, buy it! I am a fan of the stainless guns so my answer is a bit biased. If this is as good as my two, you should be happy with it. Good luck!

John Sabato · 01-27-2004, 09:04 PM

boltgun,

If you are not a digital photo guru, no problem, email the photos to lugerforum@yahoo.com and I will trim to just under the 200k limit and post them so those appreciators of the Stainless Lugers (like Steve R. and me) can admire them too!

boltgun · 01-27-2004, 11:09 PM

Thanks again John. I'll send you some more pictures of the "new" Mitchell, my DWM's and an Ermma in .380.
boltgun

01-27-2004, 03:53 PM	#1
boltgun User Join Date: Jan 2004 Location: Tennessee Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Mitchell Luger (second try for picture)

01-27-2004, 04:54 PM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	You were successful in the upload BOLTGUN, but I had to edit the URL to make it visible because you left out one character. the best way to be successful in inserting a photo or graphic in your posts is to select and "copy" the URL that you are given by the upload page, and then "paste" the URL in between the [img] photoURLhere [/img] tags. The easiest way to insert the URL is to use the "postreply" button and use the IMAGE button. This pops up a dialog box where you replace the "http://" that is defaulted there with the complete URL for the photo... Go ahead and try again as many times as you like... Try a few more photos of your Mitchell. Let me know when you are done experimenting with photo uploads and posts and I will just delete any error posts... enjoy. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

01-27-2004, 07:44 PM	#4
Herb User Join Date: Jun 2002 Location: Utah, in the land of the Sleeping Rainbow Posts: 1,457 Thanks: 0 Thanked 1 Time in 1 Post	boltgun, heck of a deal, buy them all day at that price. On the size of your pics set your camera at its lowest quality setting, usually about 65-70 kb. For the purpose of posting to the forum the photos are great and fit well. The higher settings are only for making high quality prints on your printer or for sending to a processor, the lowest works fine and you will get a whole lot more of them out of your flash card. __________________ Utah, where gun control means a steady trigger pull

01-27-2004, 09:04 PM	#6
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	boltgun, If you are not a digital photo guru, no problem, email the photos to lugerforum@yahoo.com and I will trim to just under the 200k limit and post them so those appreciators of the Stainless Lugers (like Steve R. and me) can admire them too! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

01-27-2004, 06:46 PM	#3
boltgun User Join Date: Jan 2004 Location: Tennessee Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	John, Thanks for all of your help and the additional explanation regarding the "upload" feature. I have taken other pictures however, they exceed 200kb and the upload link indicates that this is the limit. Anyway, the picture is of the recently acquired Mitchell, new and unfired without the box for $350. boltgun

01-27-2004, 08:39 PM	#5
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 1 Time in 1 Post	For that price, buy it! I am a fan of the stainless guns so my answer is a bit biased. If this is as good as my two, you should be happy with it. Good luck!

01-27-2004, 11:09 PM	#7
boltgun User Join Date: Jan 2004 Location: Tennessee Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks again John. I'll send you some more pictures of the "new" Mitchell, my DWM's and an Ermma in .380. boltgun