GT Hyper-Magazine!!!

Johnny C. Kitchens · 06-21-2004, 08:12 PM

I recently had a 70's Mauser magazine coated with NP3, and then G.T. put one of his, you gotta see it to believe, aluminum bases and super springs into this like new Hyper-Magazine. Here are the results below. Sort of a before and after shot. The NP3 is responsible for the antique pewter like look of the magazine body, but it sure is slick in operation. A range report will come soon...

Waschbaer · 06-21-2004, 10:46 PM

Umm... excuse my lack of brainpower, NP3? What's that, teflon coat or some such?

Johnny C. Kitchens · 06-22-2004, 12:53 AM

Robar applies a matrix coating of nickel-phosphate and teflon. The nickel provides wear resistance, and the teflon, of course, reduces friction. I read that 60% of the springs energy was used to overcome friction in a Luger magazine due to the angle feed. I figured reducing friction had to help the magazine work better. I have one magazine with a black teflon coating that does indeed work better, than one not coated. Disadvantage, is that the black teflon shows every scratch brilliantly! I hope this one functions as good or better...

John Sabato · 06-22-2004, 11:34 AM

G.T.'s aluminum magazine bases are a wonder to behold! I am sure you have all seen those commercials about a place called "perfect"... well that is where these mag bottoms come from!

06-21-2004, 08:12 PM	#1
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	GT Hyper-Magazine!!! I recently had a 70's Mauser magazine coated with NP3, and then G.T. put one of his, you gotta see it to believe, aluminum bases and super springs into this like new Hyper-Magazine. Here are the results below. Sort of a before and after shot. The NP3 is responsible for the antique pewter like look of the magazine body, but it sure is slick in operation. A range report will come soon... __________________ Johnny C. Kitchens

06-22-2004, 12:53 AM	#3
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	Robar applies a matrix coating of nickel-phosphate and teflon. The nickel provides wear resistance, and the teflon, of course, reduces friction. I read that 60% of the springs energy was used to overcome friction in a Luger magazine due to the angle feed. I figured reducing friction had to help the magazine work better. I have one magazine with a black teflon coating that does indeed work better, than one not coated. Disadvantage, is that the black teflon shows every scratch brilliantly! I hope this one functions as good or better... __________________ Johnny C. Kitchens

06-22-2004, 11:34 AM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	G.T.'s aluminum magazine bases are a wonder to behold! I am sure you have all seen those commercials about a place called "perfect"... well that is where these mag bottoms come from! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

06-21-2004, 10:46 PM	#2
Waschbaer User Join Date: Jun 2003 Location: New Mexico, USA Posts: 47 Thanks: 0 Thanked 0 Times in 0 Posts	Umm... excuse my lack of brainpower, NP3? What's that, teflon coat or some such?