1941 byf P-08 Military Luger PHOTO'S ADDED

paid4c4 · 07-24-2012, 01:14 AM

I recently acquired a 1941 byf P-08 Luger with black grips. I am not calling it a "Black Widow" but I believe some do. All the numbers match and it operates smooth with a nice muzzle and barrel. The finish is thin but original with a good strawberry. It appears this luger was carried a lot but not shoot much. I'd rather have the thin original finish than a re-blue. There are no import markings and I believe it to be a battlefield bring home. The magazine has the 08 markings and appears to be original for the luger but it doesn't have a matching serial number which my 1915 luger does? I've cleaned it and shot Winchester white box 9mm through it. It is very accurate and shoots smooth and well. I'll post photographs tomorrow or Wednesday. I was curious about the magazine and about the rarity. Overall it's a nice historical piece and I'm glad to have it in my collection. Also anything I should look for?
Bill
PS: I'm also looking for a correct tool and holster.

Lugerdoc · 07-24-2012, 11:19 AM

Bill, If your 41byf is early enough to have the E/655 inspector's markings, I have the correct mag loading tool for you. TH

ithacaartist · 07-24-2012, 01:39 PM

Quote:

Originally Posted by paid4c4;217199 The finish is thin but original with a good [COLOR="Magenta"

strawberry.[/COLOR]

Bill, did you mean "straw"? Straw colored small parts were not produced after a point a few years before your '41 was made?

Here's a good example of how pics can help us help you figure out what is going on with your gun.

mrerick · 07-24-2012, 01:45 PM

Bill, Welcome to the forum.

Often the salt bluing of these Lugers turned some of the parts a "plum" color due to bluing process temperature and the alloy content of the steel involved. I have a couple that are like this.

If you have original bakelite grips on this Luger, it would be correct to find an un-numbered bakelite base magazine for it.

Marc

paid4c4 · 07-24-2012, 02:28 PM

I did mean straw, pardon my mistake as I was eating a strawberry short cake while posting the tread. I'll take some different pictures as those don't look good. The serial number is 9650, year 1941.
Bill

mrerick · 07-25-2012, 10:28 AM

Bill, is there a suffix letter under the serial number on the front of the frame (above the trigger guard). If so, that's part of the pistol's complete serial number .

you appear to have the correct matching magazine for your 41 byf. Does it have the correct WaAmt acceptance marking, and "fxo" stamped on it.

You are right to never consider making any changes to it like refinishing. It is a good honest Luger that was likely a battlefield capture. The wear demonstrates it's authenticity.

Do be careful about firing it. Breaking an original numbered part reduces it's value (historically and financially) quite a bit.

All in all, you have a very nice Luger.

Marc

paid4c4 · 07-25-2012, 10:49 AM

Marc, thank you for the comments. There is a letter on the front of the frame which is an "N". I'll get some better pictures of the magazine for further discussion. I agree with you about shooting an historical numbered piece but I like to verify every firearm I own as to it's ability to work as originally built. I'm glad I shoot this one as it was truly a joy to shoot and as with most of my pistols it's more accurate than I am. The barrel on this luger is in great condition with no pitting or rust and sharp lands and groves. Even though the finish is thin I'm very happy with this piece of history.
Bill

Frank · 07-25-2012, 07:58 PM

Bill, please post a picture of the serial number on the frame front. Chances are the suffix is a "P", not a "N". Thanks!!

paid4c4 · 07-25-2012, 09:01 PM

Frank, I'll take pictures of the serial and front mark. It could be a "P" like its written in script. According to the markings on the side it is (46 & 47. Mauser military proofs. S/42, 42, and BYF coded Lugers. Left and right proofs appear on barrel, right proof on breechblock.) I guess the BYF code covers 1941 lugers. It also appears to have the numbers 881 underneath the serial number on the bottom of the barrel. Is there no end to the numbers, marks and proofs on lugers!
Bill

07-24-2012, 01:14 AM	#1
paid4c4 User Join Date: Jun 2010 Location: Northern Kentucky Posts: 62 Thanks: 1 Thanked 5 Times in 2 Posts	1941 byf P-08 Military Luger PHOTO'S ADDED I recently acquired a 1941 byf P-08 Luger with black grips. I am not calling it a "Black Widow" but I believe some do. All the numbers match and it operates smooth with a nice muzzle and barrel. The finish is thin but original with a good strawberry. It appears this luger was carried a lot but not shoot much. I'd rather have the thin original finish than a re-blue. There are no import markings and I believe it to be a battlefield bring home. The magazine has the 08 markings and appears to be original for the luger but it doesn't have a matching serial number which my 1915 luger does? I've cleaned it and shot Winchester white box 9mm through it. It is very accurate and shoots smooth and well. I'll post photographs tomorrow or Wednesday. I was curious about the magazine and about the rarity. Overall it's a nice historical piece and I'm glad to have it in my collection. Also anything I should look for? Bill PS: I'm also looking for a correct tool and holster. Last edited by paid4c4; 07-25-2012 at 12:17 AM.

07-24-2012, 11:19 AM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Bill, If your 41byf is early enough to have the E/655 inspector's markings, I have the correct mag loading tool for you. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

07-24-2012, 01:45 PM	#4
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	Bill, Welcome to the forum. Often the salt bluing of these Lugers turned some of the parts a "plum" color due to bluing process temperature and the alloy content of the steel involved. I have a couple that are like this. If you have original bakelite grips on this Luger, it would be correct to find an un-numbered bakelite base magazine for it. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-24-2012, 02:28 PM	#5
paid4c4 User Join Date: Jun 2010 Location: Northern Kentucky Posts: 62 Thanks: 1 Thanked 5 Times in 2 Posts	I did mean straw, pardon my mistake as I was eating a strawberry short cake while posting the tread. I'll take some different pictures as those don't look good. The serial number is 9650, year 1941. Bill Last edited by paid4c4; 07-24-2012 at 08:47 PM.

07-25-2012, 10:28 AM	#6
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	Bill, is there a suffix letter under the serial number on the front of the frame (above the trigger guard). If so, that's part of the pistol's complete serial number . you appear to have the correct matching magazine for your 41 byf. Does it have the correct WaAmt acceptance marking, and "fxo" stamped on it. You are right to never consider making any changes to it like refinishing. It is a good honest Luger that was likely a battlefield capture. The wear demonstrates it's authenticity. Do be careful about firing it. Breaking an original numbered part reduces it's value (historically and financially) quite a bit. All in all, you have a very nice Luger. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-25-2012, 10:49 AM	#7
paid4c4 User Join Date: Jun 2010 Location: Northern Kentucky Posts: 62 Thanks: 1 Thanked 5 Times in 2 Posts	Marc, thank you for the comments. There is a letter on the front of the frame which is an "N". I'll get some better pictures of the magazine for further discussion. I agree with you about shooting an historical numbered piece but I like to verify every firearm I own as to it's ability to work as originally built. I'm glad I shoot this one as it was truly a joy to shoot and as with most of my pistols it's more accurate than I am. The barrel on this luger is in great condition with no pitting or rust and sharp lands and groves. Even though the finish is thin I'm very happy with this piece of history. Bill Last edited by paid4c4; 07-25-2012 at 04:51 PM.

07-25-2012, 07:58 PM	#8
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 163 Times in 87 Posts	Bill, please post a picture of the serial number on the frame front. Chances are the suffix is a "P", not a "N". Thanks!!

07-25-2012, 09:01 PM	#9
paid4c4 User Join Date: Jun 2010 Location: Northern Kentucky Posts: 62 Thanks: 1 Thanked 5 Times in 2 Posts	Frank, I'll take pictures of the serial and front mark. It could be a "P" like its written in script. According to the markings on the side it is (46 & 47. Mauser military proofs. S/42, 42, and BYF coded Lugers. Left and right proofs appear on barrel, right proof on breechblock.) I guess the BYF code covers 1941 lugers. It also appears to have the numbers 881 underneath the serial number on the bottom of the barrel. Is there no end to the numbers, marks and proofs on lugers! Bill