Luger Magazine ID?

Patronen · 05-16-2012, 07:34 AM

Gentlemen:
This magazine is devoid of any markings. The bottom is Aluminum, but I'm unshure if it was a newer replacement on an older tube. I'm leaning towards an aftermarket at this point.
Anythoughts?
Thanks in advance!

John Sabato · 05-16-2012, 10:56 AM

This is either an aftermarket magazine, likely an old Triple-K or Megcar... or mexican manufactured...

OR what it looks like to me is that it is an original magazine that has been "repaired" using an aluminum base from an aftermarket magazine... the dual pins holding the base are not seen on original magazines.

Both wooden and aluminum bases on original mags are held in by ONE pin at the rear, except in the case of the extruded magazines (FXO and Haenel type-which this is not), which hold the base on with a single pin through the knob itself.

glock30 · 05-17-2012, 06:58 PM

Original Magazine, different base, yep. NO aftermarket has those intricate stamp lines.

05-16-2012, 07:34 AM	#1
Patronen User Join Date: Jun 2010 Posts: 312 Thanks: 335 Thanked 93 Times in 70 Posts	Luger Magazine ID? Gentlemen: This magazine is devoid of any markings. The bottom is Aluminum, but I'm unshure if it was a newer replacement on an older tube. I'm leaning towards an aftermarket at this point. Anythoughts? Thanks in advance! Attached Thumbnails Attached Images __________________ Dave

05-16-2012, 10:56 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,153 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	This is either an aftermarket magazine, likely an old Triple-K or Megcar... or mexican manufactured... OR what it looks like to me is that it is an original magazine that has been "repaired" using an aluminum base from an aftermarket magazine... the dual pins holding the base are not seen on original magazines. Both wooden and aluminum bases on original mags are held in by ONE pin at the rear, except in the case of the extruded magazines (FXO and Haenel type-which this is not), which hold the base on with a single pin through the knob itself. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

05-17-2012, 06:58 PM	#3
glock30 User Join Date: Aug 2011 Location: Obama LAND Posts: 206 Thanks: 18 Thanked 17 Times in 14 Posts	Original Magazine, different base, yep. NO aftermarket has those intricate stamp lines.