![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
![]() |
#1 |
User
Join Date: May 2010
Location: Virginia Beach, VA 23452
Posts: 81
Thanks: 0
Thanked 3 Times in 3 Posts
|
![]()
I don't know if any of you have tried Wolff Luger springs, but I am confused by my experience with them. I recently ordered two of their Luger "Service Paks" with replacement springs for the trigger, extractor, striker and recoil.
When I visually compared the recoil spring with the ones in the Lugers, it was obvious the Wolff spring had a coil diameter about twice that of the original Luger spring. It appeared to me that the Wolff springs probably would not even fit in the channel in the frame, so I didn't give it a try. It also appeared that the Wolff spring might even have trouble seating on the base of the guide rod. I e-mailed Wolff to find out what was going on with these "Service Paks," but I have yet to receive a reply. I haven't tried the other springs in the Wolff kit. Has anyone here tried these Wolff springs in their Luger? |
![]() |
![]() |
![]() |
#2 |
User
Join Date: Jul 2003
Location: New York, NY
Posts: 1,579
Thanks: 2,144
Thanked 402 Times in 251 Posts
|
![]()
Dear JRS:
The Wolff springs are the best we currently have on the commercial market in the United States. Yes, that recoil spring is about a mile too long, but it will fit in the frame. Talk to me about accurate Luger shooting. Sieger |
![]() |
![]() |
![]() |
#3 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,990 Times in 1,205 Posts
|
![]()
I installed a kit in a tired VoPo shooter a few years ago. The results were pretty good, actually. The VoPo started working again, so the kit did it's job.
|
![]() |
![]() |
![]() |
#4 | |
User
Join Date: Jul 2003
Location: New York, NY
Posts: 1,579
Thanks: 2,144
Thanked 402 Times in 251 Posts
|
![]() Quote:
What springs are available in Europe for the Luger, and are they any better of an execution than the aforementioned? Sieger |
|
![]() |
![]() |
![]() |
#5 |
User
Join Date: Jun 2003
Location: Western Washington
Posts: 107
Thanks: 58
Thanked 22 Times in 17 Posts
|
![]()
I installed a Wolff recoil spring in my Finnish M-23 in 9mm. It installed just fine and functions perfectly.....
|
![]() |
![]() |
![]() |
#6 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,990 Times in 1,205 Posts
|
![]()
I got mine from the US: Wolff.
|
![]() |
![]() |
![]() |
|
|