Stove piping live round

flynt · 04-22-2010, 10:49 PM

I apologize if this problem has been previously discussed, but here goes:

I have a G date that is matching except for the side plate. I have tried different ammo and different mags, but I get the same problem. After about 3-4 rounds are fired successfully, the breech block pushes a live round nose up toward the chamber. Tonight I got one live round that was wedged at a perfect 90 degree angle, and several others that were at about 45 degrees. It'll do this once per mag, and then after I clear the lodged round it functions fine.

Any advice would be appreciated. Thanks.

alanint · 04-23-2010, 05:59 AM

This sounds like a magazine issue. Have you experienced this with other mags in the gun?

flynt · 04-23-2010, 09:42 AM

Yes. Everything from the correct G Date mag to the Schmeisser mags.

Lugerdoc · 04-23-2010, 09:41 AM

THis could be any of several things or a combination of them: Inconsistant ammo load, damaged extractor or weak spring, or too strong a recoil spring for the ammo that you are using. TH

John Sabato · 04-23-2010, 12:36 PM

Recommend you get a magazine that has been rebuilt by member GT... they are a "known quality"... then I would get you a new recoil spring (Wolf)... and use quality ammo (Winchester white box bulk ammo sold at walmart)... to see if the problem persists...

Do these in reverse order (least to most expensive) to try and solve your problem.

04-22-2010, 10:49 PM	#1
flynt User Join Date: Jul 2007 Location: Dallas-Ft. Worth Metroplex Posts: 6 Thanks: 3 Thanked 1 Time in 1 Post	Stove piping live round I apologize if this problem has been previously discussed, but here goes: I have a G date that is matching except for the side plate. I have tried different ammo and different mags, but I get the same problem. After about 3-4 rounds are fired successfully, the breech block pushes a live round nose up toward the chamber. Tonight I got one live round that was wedged at a perfect 90 degree angle, and several others that were at about 45 degrees. It'll do this once per mag, and then after I clear the lodged round it functions fine. Any advice would be appreciated. Thanks.

04-23-2010, 09:41 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	THis could be any of several things or a combination of them: Inconsistant ammo load, damaged extractor or weak spring, or too strong a recoil spring for the ammo that you are using. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

04-23-2010, 12:36 PM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Recommend you get a magazine that has been rebuilt by member GT... they are a "known quality"... then I would get you a new recoil spring (Wolf)... and use quality ammo (Winchester white box bulk ammo sold at walmart)... to see if the problem persists... Do these in reverse order (least to most expensive) to try and solve your problem. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

04-23-2010, 05:59 AM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	This sounds like a magazine issue. Have you experienced this with other mags in the gun?

04-23-2010, 09:42 AM	#3
flynt User Join Date: Jul 2007 Location: Dallas-Ft. Worth Metroplex Posts: 6 Thanks: 3 Thanked 1 Time in 1 Post	Yes. Everything from the correct G Date mag to the Schmeisser mags.