Stoeger sick and beautiful

greenpen · 02-10-2007, 12:15 PM

Hello I used to have 4 lugers all with the nazi markings on them all matched except ones side plate I sold them off a few years ago and they sure went up in value. I sure regret what I did well after the whole thing about being bitter that i cant find a time machine and i cant spend like i used to i started to look around for a better hobby but Lugers are where its at. so as luck would have it a couple a weeks ago i went to a gun store that caters to police market and found a stainless stoeger 9mm it is mint condition for 595.oo I bought it. I guess that dont happen much I guess the folks that shop there prefer a modern gun and over look this type. well any way soon The extractors pin busted Luckily I found the extractor itself with some help at the range. I ordered some pins and springs from numrich but the pins were for the 22 cal stoeger I went to my buddy and he hooked it up with the right pin. any way It has trouble feeding so I may try the Value box of winchester from wal mart. Any tips for tweaking are appreciated also does any one know where i can buy a stoeger extractor for a spare in case im in the woods and loose it. the one at numrich is for a 22 Thanks greenpen

Edward Tinker · 02-10-2007, 10:00 PM

Walter, welcome to the forum.

Send lugerdoc an email, he might have the stoeger part you need.

Ed

greenpen · 02-11-2007, 07:51 AM

Thank You

Lugerdoc · 02-11-2007, 08:14 AM

Walther, Unless the part that you need is interchangable with the standard PO8 which would not be in stainless steel, your will have to get the original parts from the manufacturer (see the recommended vendor section). Lugerdoc

greenpen · 02-11-2007, 09:43 AM

Thank You

Alx · 02-14-2007, 07:02 PM

IMHO, after struggling with three of these stainless steel Stoegers, I have given up on them, as being just too sloppily made, ill fitted, and not sufficiently hard. Not hard enough to sustain firing live ammo, especially the toggle ramps on the frame, which were hammered out of shape by the toggle recoiling, but too soft inside also, where the metal is just mushy.
The exterior buffing and polishing would pass for a Taurus, or Rossi, but compared to a German P08, NO comparison.
For the same money, or close, I recommend a shooter genuine Luger, and if you want the silvery look, and the German gun is not a collector grade, strip off the old messed up original finish and enjoy the naked gun look.

The photos above show a gun that has extensive light-to-heavy pitting in various areas, but after some filing and sanding, and complete chemical stripping (and a new Austrian barrel) it looks miles better than the rusted and deeply pitted, and re-blued, and re-rusted mess it was before.

This was the first Luger I bought after giving up on the pretty Stoegers, and it is alot more satisfying to have a usable, parts-available, solidly made (1917) precise, cheap and real gun.

greenpen · 02-15-2007, 11:13 AM

AMEN I do agree!!

davidkachel · 02-15-2007, 11:37 AM

Same here. I had a Mitchell (later sold by Stoeger). They can be made to function correctly, I understand, but the aggravation is simply not worth it.
There are so many guys here who can provide you with "the real thing", that works, and at a good price that the Mitchell/Stoeger just isn't worth it. Life's too short for such aggravation.

SS109 · 03-22-2007, 09:33 PM

Thanks for the info about the Stoegers. Personally I am a little surprised. You would think the Stoeger people would have stronger metals and newer guns would be stronger than my tired 70 year old DWM's.

I was thinking about selling my tempermental P08's and buying the newer & "improved" stainless pistols.

02-10-2007, 12:15 PM	#1
greenpen User Join Date: Feb 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Stoeger sick and beautiful Hello I used to have 4 lugers all with the nazi markings on them all matched except ones side plate I sold them off a few years ago and they sure went up in value. I sure regret what I did well after the whole thing about being bitter that i cant find a time machine and i cant spend like i used to i started to look around for a better hobby but Lugers are where its at. so as luck would have it a couple a weeks ago i went to a gun store that caters to police market and found a stainless stoeger 9mm it is mint condition for 595.oo I bought it. I guess that dont happen much I guess the folks that shop there prefer a modern gun and over look this type. well any way soon The extractors pin busted Luckily I found the extractor itself with some help at the range. I ordered some pins and springs from numrich but the pins were for the 22 cal stoeger I went to my buddy and he hooked it up with the right pin. any way It has trouble feeding so I may try the Value box of winchester from wal mart. Any tips for tweaking are appreciated also does any one know where i can buy a stoeger extractor for a spare in case im in the woods and loose it. the one at numrich is for a 22 Thanks greenpen

02-10-2007, 10:00 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Walter, welcome to the forum. Send lugerdoc an email, he might have the stoeger part you need. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

02-11-2007, 08:14 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Walther, Unless the part that you need is interchangable with the standard PO8 which would not be in stainless steel, your will have to get the original parts from the manufacturer (see the recommended vendor section). Lugerdoc __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

02-15-2007, 11:37 AM	#8
davidkachel User Join Date: Nov 2006 Location: Texas Posts: 784 Thanks: 0 Thanked 3 Times in 3 Posts	Same here. I had a Mitchell (later sold by Stoeger). They can be made to function correctly, I understand, but the aggravation is simply not worth it. There are so many guys here who can provide you with "the real thing", that works, and at a good price that the Mitchell/Stoeger just isn't worth it. Life's too short for such aggravation. __________________ A heroin habit would be cheaper.

03-22-2007, 09:33 PM	#9
SS109 User Join Date: Dec 2005 Location: Jefferson, CO Posts: 56 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the info about the Stoegers. Personally I am a little surprised. You would think the Stoeger people would have stronger metals and newer guns would be stronger than my tired 70 year old DWM's. I was thinking about selling my tempermental P08's and buying the newer & "improved" stainless pistols. __________________ 1916 LP08 1923 9mm P08 Commercial Import 1920 .30 Luger Commercial

02-11-2007, 07:51 AM	#3
greenpen User Join Date: Feb 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Thank You

02-11-2007, 09:43 AM	#5
greenpen User Join Date: Feb 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Thank You

02-14-2007, 07:02 PM	#6
Alx User Join Date: Sep 2006 Location: Nashville, Tennessee area Posts: 263 Thanks: 5 Thanked 3 Times in 3 Posts	IMHO, after struggling with three of these stainless steel Stoegers, I have given up on them, as being just too sloppily made, ill fitted, and not sufficiently hard. Not hard enough to sustain firing live ammo, especially the toggle ramps on the frame, which were hammered out of shape by the toggle recoiling, but too soft inside also, where the metal is just mushy. The exterior buffing and polishing would pass for a Taurus, or Rossi, but compared to a German P08, NO comparison. For the same money, or close, I recommend a shooter genuine Luger, and if you want the silvery look, and the German gun is not a collector grade, strip off the old messed up original finish and enjoy the naked gun look. The photos above show a gun that has extensive light-to-heavy pitting in various areas, but after some filing and sanding, and complete chemical stripping (and a new Austrian barrel) it looks miles better than the rusted and deeply pitted, and re-blued, and re-rusted mess it was before. This was the first Luger I bought after giving up on the pretty Stoegers, and it is alot more satisfying to have a usable, parts-available, solidly made (1917) precise, cheap and real gun.

02-15-2007, 11:13 AM	#7
greenpen User Join Date: Feb 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	AMEN I do agree!!