Why izzit?

Navy · 11-10-2003, 08:54 PM

Today I get the change in the opening pic when everyone else has been commenting on it for days and I didn't have a clue what was going on?

Tell me, am I being discriminated against because I am a fat, middle-aged white guy, a spieces only loved by the IRS? Is it because I have congenital inabilities with computer graphics?

Do I need to get Revaarands Jackson or Sharpton to investigate the obviously anti-graphicallychallenged?

Awaiting an answer before I call my lawyers,

Tom A

John D. · 11-10-2003, 09:05 PM

It's you.

Your "cache" has a long expiration - which is a good thing - especially if you are like me - a fat, middle-aged white guy....

Oh - I just changed the opening page again - so you shuld see it in - oh - about 20 days or so....

Heh, heh, heh...........

Edward Tinker · 11-10-2003, 09:54 PM

John, or that Tom has it set up not to check for new info each visit,

Navy · 11-10-2003, 10:33 PM

"Tom has it set up not to check for new info each visit"

What in tarnation does that mean?

Tom A

Edward Tinker · 11-10-2003, 10:40 PM

You go to Tools, Internet Options, Temp Internet Files, then Settings.

What does yours have a dot by?

John D. · 11-10-2003, 10:49 PM

He's an AOL guy.... Ain't got no " Tools, Internet Options, Temp Internet Files, then Settings". Ain't got no life - no picture upload - no neither, no how

HEHEHEHEH..!!! <img border="0" title="" alt="[Wink]" src="wink.gif" />

John D. · 11-10-2003, 10:54 PM

OH - BTW - I think I messed my DNS Reverse recursives - and fixed them a bit ago. The FQDH seem to have a much better TTL on the secondaries. Especially when pulling the secondary zones...Figures

I also dumped the ROOT caches and pushed a refresh on that record from the SOA....

SOOOOOOOO.............

Wanna try:

http://pcf.lugerforum.com/forums/

And tell me it propagated??? If it did - I'll knock out the IP and use the FQDN as the TLD....

Thanks!!!

John D.

Ron Wood · 11-10-2003, 11:12 PM

Perhaps you should fram the jimjam and cycle the spersamine duplexer until one porzibie grunch but the eggplant over there. Then again, maybe not.

Edward Tinker · 11-10-2003, 11:19 PM

The eggplant model only works with aOL 8.6

John D. · 11-10-2003, 11:22 PM

Dear Mr. Wood.......

I already jimjammed the spersamine duplexer and threw in another gort to mutliplex the porzibie grunch. However - the eggplant I have not tried - well - yet...

For the rest of you'ze folks - who have no idea what we are talking about.....

You are not alone

In fact - my post makes PERFECT sense. Mr. Wood's post - OTOH - has me perplexed <img border="0" title="" alt="[Wink]" src="wink.gif" />

Heh...!!!!

Ron Wood · 11-10-2003, 11:31 PM

Ah, perhaps you were not an avid reader of Mad Magazine nearly a quarter of a century ago.
Alfred E. Neumann would understand perfectly...What, me worry?

Edward Tinker · 11-10-2003, 11:44 PM

He was depraved, I mean deprived as a child, Spy VS Spy always got me laughing...

John Sabato · 11-11-2003, 07:07 AM

Tom's problem is obviously a faulty muffler bearing... that is probably what let the smoke leak out when the bottle turned over...

Navy · 11-11-2003, 10:28 AM

As everyone knows, it crackers to slip a rozzer to dropskie in snide.
And FWIW, I had the muffler bearing on this 'puter replaced after I drained the bourbon out of the motherboard.

So there.

Tom A.

11-10-2003, 08:54 PM	#1
Navy RIP Join Date: Jun 2002 Location: Dc 'burbs in Virginia Posts: 2,482 Thanks: 0 Thanked 16 Times in 10 Posts	Why izzit? Today I get the change in the opening pic when everyone else has been commenting on it for days and I didn't have a clue what was going on? Tell me, am I being discriminated against because I am a fat, middle-aged white guy, a spieces only loved by the IRS? Is it because I have congenital inabilities with computer graphics? Do I need to get Revaarands Jackson or Sharpton to investigate the obviously anti-graphicallychallenged? Awaiting an answer before I call my lawyers, Tom A

11-10-2003, 09:54 PM	#3
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	John, or that Tom has it set up not to check for new info each visit, __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

11-10-2003, 10:40 PM	#5
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	You go to Tools, Internet Options, Temp Internet Files, then Settings. What does yours have a dot by? __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

11-10-2003, 11:12 PM	#8
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	Perhaps you should fram the jimjam and cycle the spersamine duplexer until one porzibie grunch but the eggplant over there. Then again, maybe not. __________________ If it's made after 1918...it's a reproduction

11-10-2003, 11:19 PM	#9
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	The eggplant model only works with aOL 8.6 __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

11-10-2003, 09:05 PM	#2
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	It's you. Your "cache" has a long expiration - which is a good thing - especially if you are like me - a fat, middle-aged white guy.... Oh - I just changed the opening page again - so you shuld see it in - oh - about 20 days or so.... Heh, heh, heh...........

11-10-2003, 10:33 PM	#4
Navy RIP Join Date: Jun 2002 Location: Dc 'burbs in Virginia Posts: 2,482 Thanks: 0 Thanked 16 Times in 10 Posts	"Tom has it set up not to check for new info each visit" What in tarnation does that mean? Tom A

11-10-2003, 10:49 PM	#6
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	He's an AOL guy.... Ain't got no " Tools, Internet Options, Temp Internet Files, then Settings". Ain't got no life - no picture upload - no neither, no how HEHEHEHEH..!!! <img border="0" title="" alt="[Wink]" src="wink.gif" />

11-10-2003, 10:54 PM	#7
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	OH - BTW - I think I messed my DNS Reverse recursives - and fixed them a bit ago. The FQDH seem to have a much better TTL on the secondaries. Especially when pulling the secondary zones...Figures I also dumped the ROOT caches and pushed a refresh on that record from the SOA.... SOOOOOOOO............. Wanna try: http://pcf.lugerforum.com/forums/ And tell me it propagated??? If it did - I'll knock out the IP and use the FQDN as the TLD.... Thanks!!! John D.

11-10-2003, 11:22 PM	#10
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Dear Mr. Wood....... I already jimjammed the spersamine duplexer and threw in another gort to mutliplex the porzibie grunch. However - the eggplant I have not tried - well - yet... For the rest of you'ze folks - who have no idea what we are talking about..... You are not alone In fact - my post makes PERFECT sense. Mr. Wood's post - OTOH - has me perplexed <img border="0" title="" alt="[Wink]" src="wink.gif" /> Heh...!!!!

11-10-2003, 11:31 PM	#11
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	Ah, perhaps you were not an avid reader of Mad Magazine nearly a quarter of a century ago. Alfred E. Neumann would understand perfectly...What, me worry? __________________ If it's made after 1918...it's a reproduction

11-10-2003, 11:44 PM	#12
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	He was depraved, I mean deprived as a child, Spy VS Spy always got me laughing... __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

11-11-2003, 07:07 AM	#13
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Tom's problem is obviously a faulty muffler bearing... that is probably what let the smoke leak out when the bottle turned over... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

11-11-2003, 10:28 AM	#14
Navy RIP Join Date: Jun 2002 Location: Dc 'burbs in Virginia Posts: 2,482 Thanks: 0 Thanked 16 Times in 10 Posts	As everyone knows, it crackers to slip a rozzer to dropskie in snide. And FWIW, I had the muffler bearing on this 'puter replaced after I drained the bourbon out of the motherboard. So there. Tom A.